Section 9 (28 Ignition System, PREGLOW System E-Hybrid -- 9YA - Cayenne (9YA))

• WM, 280419 Removing And Installing Ignition Starter Switch
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Ignition Starter Switch
  • Installing Ignition Starter Switch
  • Subsequent Work
• WM, 282020 Removing And Installing Ignition Coils (V6 Turbo)
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Ignition Coils
    • Removing Ignition Coils For Cylinders 1 To 3
    • Removing Ignition Coils For Cylinders 4 To 6
  • Installing Ignition Coils
    • Installing Ignition Coils For Cylinders 1 To 3
    • Installing Ignition Coils For Cylinders 4 To 6
  • Subsequent Work
• WM, 2820IN Applying Lubricant On Ignition Coils
  • Information
• WM, 283919 Removing And Installing Camshaft Sensor (V6 Turbo)
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Camshaft Sensor
    • Removing Camshaft Sensor (Intake Camshafts)
    • Removing Camshaft Sensor (Outlet Camshafts)
  • Installing Camshaft Sensor
    • Install Camshaft Sensor
  • Subsequent Work
• WM, 284419 Removing And Installing Hall-Sender Rotor
  • Tools
  • Installation Position
  • Preliminary Work
  • Removing Hall-Sender Rotor
  • Installing Hall-Sender Rotor
  • Subsequent Work
• WM, 287020 Removing And Installing Spark Plugs
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Spark Plugs
  • Installing Spark Plugs
  • Subsequent Work
• WM, 287219 Removing And Installing Knock Sensor (V6 Turbo)
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Knock Sensor
  • Installing Knock Sensor
• WM, 287319 Removing And Installing Pulse Sender
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Pulse Sender
  • Installing Pulse Sender
  • Subsequent Work
    • Notes
    • Subsequent Work For Diagnostic Scopes