LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (28 Ignition System, PREGLOW System E-Hybrid -- 9YA - Cayenne (9YA)) >> WM, 283919 Removing And Installing Camshaft Sensor (V6 Turbo) >> Removing Camshaft Sensor >> Removing Camshaft Sensor (Outlet Camshafts)

Removing Camshaft Sensor (Outlet Camshafts)

WARNING: This page is about a different variant/trim than selected.
CAUTION: Hot components 
  • Risk of burns 
    1. → Let hot components cool down.
    2. → Wear personal protective gear.
  1. Remove camshaft sensor -1-  .
    G15242784Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Camshaft sensor

    1. 1.1  Release and disconnect electric plug connection -2-  .
    2. 1.2  Unscrew screw -3-  and remove.
      1. 1.2.1  At the camshaft sensor of the exhaust camshaft cylinder bank 2, the thermal insulation must also be lifted.
    3. 1.3  Remove camshaft sensor -1-  .
scientia non olet · About LEMON Manuals