LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (28 Ignition System, PREGLOW System E-Hybrid -- 9YA - Cayenne (9YA)) >> WM, 287219 Removing And Installing Knock Sensor (V6 Turbo) >> Installing Knock Sensor

Installing Knock Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screw on knock sensor to > Tightening torque 30 Nm (22 ftlb.) (22.1 ftlb.)  .

      Subsequent work

  1. Install engine carrier.

    > 103519 REMOVING AND INSTALLING ENGINE MOUNT (V6 TURBO)

scientia non olet · About LEMON Manuals