Installing Pulse Sender

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pulse sender

1. 1.1  Insert pulse sender -1-  .
2. 1.2  Fit and tighten screw -3-  .

   V6 with aluminum screw: > Initial tightening 3 Nm (2 ftlb.) (2.2 ftlb.)  > Torque angle 90° 

   V8 with steel screw: > Tightening torque 9 Nm (6.5 ftlb.) (6.6 ftlb.) 

3. 1.3  Connect and lock electric plug connection -2-  .