50 - Body Front - 987-BOXSTER & CAYMAN
- WM 5000IN Using 2K Acoustic Filler Foam "AFS-VARIO" On The Body (All Models)
- WM 5000IN Water Drainage Diagram (All Models)
- WM 501055 Replacing Front Closing Panel (All Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
- Removing Front Closing Panel
- Preparing Connection Areas Of The Body For Installing The Front Closing Panel
- Fitting Front Closing Panel And Preparing For Installation
- Installing Front Closing Panel
- Subsequent Work
- WM 501455 Replacing Front Panel (All Models)
- WM 502055 Replacing Front Floor Panel (All Models)
- WM 505519 Removing And Installing Front Fender (All Models)
- WM 505619 Removing And Installing Front Wheel Housing Liner (All Models)
- WM 507455 Replacing Front Wheel Housing (All Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
- Removing Front Wheel Housing
- Preparing Connection Areas Of Body For Installation Of Front Wheel Housing
- Fitting Front Wheel Housing And Preparing For Installation
- Installing Front Wheel Housing
- Subsequent Work
- WM 507455 Replacing Front Wheel Housing (Section) (All Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
- Removing Front Wheel Housing (Section)
- Preparing Connection Areas Of The Body For Installing The Front Wheel Housing (Section)
- Fitting In Front Wheel Housing And Preparing For Installation
- Installing Front Wheel Housing (Section)
- Subsequent Work
- WM 507755 Replacing Outer Front Side Member (All Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
- Removing Outer Front Side Member
- Preparing Connection Areas Of Body For Installation Of Outer Front Side Member
- Fitting Outer Front Side Member And Preparing For Installation
- Installing Outer Front Side Member
- Subsequent Work
- WM 507955 Replacing Front Side Member (Section) (All Models)
- Tools
- General Warning Notes
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
- Removing Front Side Member (Section)
- Preparing Connection Areas Of The Body For Installing The Front Side Members (Section)
- Fitting In Front Side Member And Preparing For Installation
- Installing Front Side Member (Section)
- Subsequent Work
- WM 507955 Replacing Inner Front Side Member (All Models)
- Tools
- Safety Instructions For Body Repairs
- Tools And Materials
- Preliminary Work For Body Repairs With Alignment Bench
- Preparing Connection Areas Of Body For Installation Of Inner Front Side Member
- Fitting Inner Front Side Member And Preparing For Installation
- Installing Inner Front Side Member
- Subsequent Work
- WM 508719 Removing And Installing Cowl Panel Cover (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R)
- WM 509555 Replacing Body Front Section (All Models)