Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws at top flange Flansch | Tightening torque | 4.5 Nm (3.5 ftlb.) | |||
| Fastening screws M6 on A-piller | Tightening torque | 9.7 Nm (7.0 ftlb.) | |||
| Fastening nut M6 on wing strut | Tightening torque | 7.0 ftlb. | |||
| Fastening screw on retaining strip | Tightening torque | 2.0 ftlb. | |||
| Fastening screw M6 x 20 on tank filler neck | Tightening torque | 7.5 ftlb. |