Electrical System, Equipment & Instruments (08 Of 11) -- 447 Chassis
- Removal & Installation
- Replace Positive Line Of Auxiliary Battery With Removed Left Seat Base (Code: VS2KAZUBAT) - SM54.10-S-0049-02A
- Wrap Positive Line Of Auxiliary Battery In Tape (Code: VS2KAZUBAT) - SM54.10-S-0049-03A
- Check Condition Of Positive Line Of Auxiliary Battery And Optimize Routing (Code: VS2KAZUBAT) - SM54.10-S-0049A
- Check For Presence Of Holder And Information Label Of Auxiliary Battery (Code: VS2ZUSBAT) - SM54.10-S-0051A
- Update SAM Control Unit Software - SM54.21-S-0078A
- Perform SCN Coding (Code: VS2SCNCODE) - SM54.21-S-0121A
- Perform SCN Coding (Code: VS2SCNCODM) - SM54.21-S-0122A
- Perform SCN Coding In SAM Control Unit (Code: VS2FARIANZ) - SM54.21-S-0230A
- Partially Remove/Install Right Rear Side Trim In Rear Passenger Compartment (Code: VS2KAMKLAP) - SM54.21-S-0250-02A
- Retrofit Camera Cover Control Unit (Code: VS2KAMKLAP) - SM54.21-S-0250A
- Perform SCN Coding Of Instrument Cluster Control Unit - SM54.30-S-0020A
- Update Instrument Cluster Control Unit Software - SM54.30-S-0021A
- Correct Maintenance Interval Display In Instrument Cluster - SM54.30-S-0090A
- Code Parktronic (PTS) Control Unit
- Update Software Of Reversing Camera (RFK) Control Unit (B84/3) (Code: VS2RU54KAM) - SM54.65-S-0029A
- Replace Reversing Camera (Code: VS2RUEKAM) - SM54.65-S-0030A
- Replace System Components For Blind Spot Assist (Code: VS2BLISPOM) - SM54.71-S-0002A
- Retrofit Left And Right Rear Blind Spot Assist Radar Sensors On Rear Bumper (Code: VS2RADSON) - SM54.71-S-0112-02A
- Retrofit Rear Blind Spot Assist Radar Sensors (Code: VS2RADSON) - SM54.71-S-0112A