Seam sealing following repair - AR97.10-P-4000P
MODEL 203
| Figure item, etc. | Work instructions | ||
|---|---|---|---|
| Vapors and gases from the solvent represent an explosion and poisoning hazard. Injury hazard to skin and eyes when working on corrosion protection agents. | Do not spray corrosion protection agent into open flames or flowing bodies and keep away from fire. Process in well-ventilated rooms, wear respiratory protection. | AS97.00-Z-0001-01A | |
| Corrosion protection | Remove chips; prime welding seams, etc. first. Do not apply sealant on bare sheet metal. | ||
| Hollow cavity preservation following repair work | Model 203.0 | AR97.20-P-1500P | |
| Model 203.2 | AR97.20-P-1500PA | ||
| Model 203.7 | AR97.20-P-1500PB | ||
| Underbody preservation | AH97.20-P-2000-01A | ||
| Sealing | After repairs on the body, seal the spot weld seams and the rivets on both sides The body connection points can require various additional sealing measures in some cases depending on the scope of repair. |
||
| Processing instructions | AR97.10-P-0500-02A | ||
| Service Information sprayable seam seal | SI97.10-P-0001A | ||
| Seam sealing following repair | Front end damage, Model 203 | AR97.10-P-4000-01P | |
| Rear end damage, Model 203.0 | AR97.10-P-4000-02P | ||
| Rear end damage, Model 203.2 | AR97.10-P-4000-02PA | ||
| Rear end damage, Model 203.7 | AR97.10-P-4000-02PB | ||
| Side damage, Model 203.0 | AR97.10-P-4000-03P | ||
| Side damage, Model 203.2 | AR97.10-P-4000-03PA | ||
| Side damage, Model 203.7 | AR97.10-P-4000-03PB | ||
| Detachable body components, Model 203.0 | AR97.10-P-4000-04P | ||
| Detachable body components, Model 203.2 | AR97.10-P-4000-04PA | ||
| Detachable body components, Model 203.7 When replacing detachable body components such as doors, etc. also seal seams and beads. |
AR97.10-P-4000-04PB |