LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2007 >> C280 Base >> Repair and Diagnosis >> Collision >> Sealing & Corrosion Protection >> Body Sealing, Corrosion Protection -- 203 Chassis >> Testing & Repair >> Seam sealing following repair, detachable body components - AR97.10-P-4000-04PA

Seam sealing following repair, detachable body components - AR97.10-P-4000-04PA

IMPORTANT Insert plastic plugs and rubber grommets with sealing compound. Keep thread of welding nuts and threaded bolts free from sealant by masking with tape or by covering with cardboard sleeves. Also keep contact surfaces for axle mounts, windows and detachable body components free of sealant.

Seal spot welding flange on both sides, where accessible. If accessible from one side only seal corresponding surface. Observe standard seals!

Shown on 203.0 

Engine hood 

Fig 1: Identifying Seam Sealing - Engine Hood - Illustrated On Model 203.0
G04736450

Front door 

Fig 2: Identifying Seam Sealing - Front Door
G04736451

Rear door 

Fig 3: Identifying Seam Sealing - Rear Door
G04736452

Rear door rear corner (right and left) 

Fig 4: Identifying Seam Sealing - Rear Door Rear Corner (Right And Left)
G04736453

Rear-end door 

Fig 5: Identifying Seam Sealing - Rear-End Door
G04736454
scientia non olet · About LEMON Manuals