Section 387 (Engine Mechanical - 5.3L, 6.0L & 6.2L - Repair Instructions - Off Vehicle)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Repair Instructions - Off Vehicle
- Draining Fluids and Oil Filter Removal
- Crankshaft Balancer Removal
- Automatic Transmission Flex Plate Removal
- Oil Level Indicator and Tube Removal
- Exhaust Manifold Removal - Left Side
- Exhaust Manifold Removal - Right Side
- Water Pump Removal
- Throttle Body Assembly Removal
- Fuel Rail and Injectors Removal
- Intake Manifold Removal (Without Active Fuel Management)
- Intake Manifold Removal (With Active Fuel Management)
- Engine Coolant Air Bleed Pipe and Hole Cover Removal
- Engine Block Valley Cover Removal
- Valve Lifter Oil Manifold Removal
- Valve Lifter Oil Filter Removal
- Valve Rocker Arm Cover Removal - Left Side
- Valve Rocker Arm Cover Removal - Right Side
- Valve Rocker Arm and Push Rod Removal
- Cylinder Head Removal - Left Side
- Cylinder Head Removal - Right Side
- Valve Lifter Removal (Without Active Fuel Management)
- Valve Lifter Removal (With Active Fuel Management)
- Oil Filter Removal
- Oil Pan Removal
- Engine Front Cover Removal
- Crankshaft Rear Oil Seal Housing Removal
- Oil Pump, Screen and Crankshaft Oil Deflector Removal
- Timing Chain, Crankshaft Sprocket, Camshaft Position Actuator, and Solenoid Valve Removal
- Camshaft Removal
- Piston, Connecting Rod, and Bearing Removal
- Crankshaft and Bearing Removal
- Engine Block Plug Removal
- Engine Block Cleaning and Inspection
- Cylinder Boring and Honing
- Crankshaft and Bearing Cleaning and Inspection
- Crankshaft Balancer Cleaning and Inspection
- Automatic Transmission Flex Plate Cleaning and Inspection
- Piston and Connecting Rod Disassemble
- Piston, Connecting Rod, and Bearing Cleaning and Inspection
- Piston and Connecting Rod Assemble
- Camshaft Bearing Removal
- Camshaft and Bearings Cleaning and Inspection
- Camshaft Bearing Installation
- Camshaft Timing Chain and Sprocket Cleaning and Inspection
- Camshaft Position Actuator Cleaning and Inspection
- Camshaft Position Actuator Magnet Cleaning and Inspection
- Camshaft Position Actuator Solenoid Valve Inspection (On-Vehicle)
- Camshaft Position Actuator Solenoid Valve Inspection (Off-Vehicle)
- Valve Rocker Arm and Push Rod Cleaning and Inspection
- Valve Lifter and Guide Cleaning and Inspection
- Cylinder Head Disassemble
- Cylinder Head Cleaning and Inspection
- Valve Guide Reaming, and Valve and Seat Grinding
- Cylinder Head Assemble
- Oil Pump Disassemble
- Oil Pump Cleaning and Inspection
- Oil Pump Assemble
- Engine Front Cover Cleaning and Inspection
- Crankshaft Rear Oil Seal Housing Cleaning and Inspection
- Engine Block Valley Cover Cleaning and Inspection
- Valve Lifter Oil Manifold Cleaning and Inspection
- Valve Rocker Arm Cover Cleaning and Inspection
- Oil Pan Cleaning and Inspection (LC9)
- Oil Pan Cleaning and Inspection (Except LC9)
- Intake Manifold Cleaning and Inspection
- Exhaust Manifold Cleaning and Inspection
- Engine Coolant Air Bleed Pipe and Hole Cover Cleaning and Inspection
- Water Pump Cleaning and Inspection
- Thread Repair
- Service Prior to Assembly
- Engine Block Plug Installation
- Crankshaft and Bearing Installation
- Piston, Connecting Rod, and Bearing Installation
- Camshaft Installation
- Timing Chain, Crankshaft Sprocket, Camshaft Position Actuator, and Solenoid Valve Installation
- Oil Pump, Screen and Crankshaft Oil Deflector Installation
- Crankshaft Rear Oil Seal Housing Installation (Without Seal in Housing)
- Crankshaft Rear Oil Seal Housing Installation (With Seal in Housing)
- Crankshaft Rear Oil Seal Installation
- Engine Front Cover Installation
- Crankshaft Front Oil Seal Installation
- Oil Pan Installation
- Oil Filter Installation
- Valve Lifter Installation (Without Active Fuel Management)
- Valve Lifter Installation (With Active Fuel Management)
- Cylinder Head Installation - Left Side
- Cylinder Head Installation - Right Side
- Valve Rocker Arm and Push Rod Installation
- Valve Rocker Arm Cover Installation - Left Side
- Valve Rocker Arm Cover Installation - Right Side
- Engine Block Valley Cover Installation
- Valve Lifter Oil Filter Installation
- Valve Lifter Oil Manifold Installation
- Engine Coolant Air Bleed Pipe and Hole Cover Installation
- Intake Manifold Installation (Without Active Fuel Management)
- Intake Manifold Installation (With Active Fuel Management)
- Fuel Rail and Injectors Installation
- Throttle Body Assembly Installation
- Water Pump Installation
- Exhaust Manifold Installation - Left Side
- Exhaust Manifold Installation - Right Side
- Oil Level Indicator and Tube Installation
- Automatic Transmission Flex Plate Installation
- Crankshaft Balancer Installation
- Engine Prelubing