LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 387 (Engine Mechanical - 5.3L, 6.0L & 6.2L - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Engine Block Valley Cover Removal

Engine Block Valley Cover Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Valley Cover
    GM1403316Courtesy of GENERAL MOTORS CORP.
  1. Remove the valley cover bolts (506).
  2. Remove the valley cover (555) and gasket (556).
  3. Remove the O-ring seals (537) from the cover.
    4. Fig 2: Oil Pressure Sensor And Washer
    GM1403317Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil pressure sensor (706) and washer (707), as required.
scientia non olet · About LEMON Manuals