Section 245 (Steering Column Switches)
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Steering Column Switches
- DTC Chart: SCCM
- Related Module DTC Charts
- Symptom Chart: Steering Column Switches
- Pinpoint Tests
- Pinpoint Test A: No Power in All Ignition Switch Positions - Vehicles with a Conventional Ignition Switch
- Pinpoint Test B: No Power in ACC - Vehicles with a Conventional Ignition Switch
- Pinpoint Test C: No Power in RUN - Vehicles with a Conventional Ignition Switch
- Pinpoint Test D: No Power in START - Vehicles with a Conventional Ignition Switch
- Pinpoint Test E: No Power in RUN-No Power in START - Vehicles with a Start-Stop Switch
- Pinpoint Test F: No Power in ACC - Vehicles with a Start-Stop Switch
- Pinpoint Test G: The Ignition Key Cannot Be Returned to the OFF Position
- Pinpoint Test H: The Ignition Key Can Be Turned to the OFF Position When the Selector Lever is Not in PARK
- Pinpoint Test I: The Start-Stop Switch Mode Indicator is Always or Never Illuminated
- Pinpoint Test J: B108A:01 or B1142:29
- Pinpoint Test K: B108A:12
- Pinpoint Test L: C0051:16 or C0051:17
- Pinpoint Test M: B11D9:16
- Pinpoint Test N: B11D9:17
- Pinpoint Test O: B1310:12
- Ignition Switch-Mechanical
- Steering Column Switches
- Removal And Installation