LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Steering Column Switches) >> Removal And Installation >> Steering Column Multifunction Switch >> Installation

Steering Column Multifunction Switch: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the multifunction switch and install the screw(s).
    • Tighten to 3 Nm (27 lb-in).
  2. If equipped, install the brake pedal adjust switch. Refer to STEERING COLUMN CONTROL SWITCH .
  3. Install the steering column shrouds. REFER to STEERING COLUMN SHROUD .
scientia non olet · About LEMON Manuals