LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Steering Column Switches) >> Description And Operation >> Push-Button Start - With Intelligent Access (IA) >> System Operation >> Acc

System Operation: Acc

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

To enter ACC mode, with the correct Intelligent Access (IA) key inside the vehicle, press and release the start/stop switch one time without pressing the brake pedal. Once the BCM-B  receives the message from the RFA  module that the correct Intelligent Access (IA) key is present inside the vehicle and the BCM-B  has detected the start/stop switch input without the BPP  input, the BCM-B  activates the RUN/ACC bus and RUN/ACC relay. The BCM-B  also sends the ignition mode message to the other modules over the MS-CAN  and the HS-CAN  .

Once the ignition has entered ACC mode, the message center displays, PRESS BRAKE TO START and then ACCESSORY POWER ACTIVE.

scientia non olet · About LEMON Manuals