LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Steering Column Switches) >> Diagnosis And Testing >> Steering Column Switches >> Related Module DTC Charts

Related Module DTC Charts

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION - BCM

DTC Description Action
U300A:01 Ignition Switch: General Electric Failure GO to PINPOINT TEST A .
B1310:14 Run/Start Control: Circuit Short to Ground or Open For vehicles with a conventional ignition switch, GO to PINPOINT TEST C .
For vehicles with push-button start, GO to PINPOINT TEST E 
B1240:11 Start Button Mode Indicator: Circuit Short to Ground GO to PINPOINT TEST I .
B1240:15 Start Button Mode Indicator: Circuit Short to Battery or Open GO to PINPOINT TEST I .
B108A:01 Start Button: General Electrical Failure GO to PINPOINT TEST J 
B1142:29 Ignition Status 1: Signal Invalid GO to PINPOINT TEST J 
B1310:12 Run/Start Control: Circuit Short to Battery GO to PINPOINT TEST O 
All other BCM  DTCs - REFER to MULTIFUNCTION ELECTRONIC MODULES
DTC DESCRIPTION - RFA MODULE

DTC Description Action
B108A:12 Start Button: Circuit Short to Battery GO to PINPOINT TEST K .
All other RFA  module DTCs - REFER to MULTIFUNCTION ELECTRONIC MODULES