LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Steering Column Switches) >> Description And Operation >> Push-Button Start - With Intelligent Access (IA) >> System Operation >> Start

System Operation: Start

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

To enter START mode, with the correct Intelligent Access (IA) key inside the vehicle, press and hold the brake pedal, then press and release the start/stop switch. Once the BCM-B  receives the message from the RFA  module that the correct Intelligent Access (IA) key is present inside the vehicle and the BCM-B  has detected the BPP  input with the start/stop switch input, the BCM-B  activates the RUN/START bus and the RUN/START relay. The BCM-B  also sends the ignition mode message to the other modules over the MS-CAN  and the HS-CAN  .

The engine can be started from any ignition mode. Once the ignition has entered START mode, the indicator in the start/stop switch illuminates.

scientia non olet · About LEMON Manuals