LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Steering Column Switches) >> Diagnosis And Testing >> Steering Column Switches >> Pinpoint Tests >> Pinpoint Test A: No Power in All Ignition Switch Positions - Vehicles with a Conventional Ignition Switch >> Visual Inspection and Diagnostic Pre-checks

Visual Inspection and Diagnostic Pre-checks

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Make sure the battery and battery cables are OK.

Make sure high current BJB  fuse B (100A) is OK.

Make sure BCM  fuse 28 (15A) is OK. See OEM FUSE AND RELAY INFORMATION .

scientia non olet · About LEMON Manuals