LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Steering Column Switches) >> Description And Operation >> Conventional Ignition Switch - Without Intelligent Access (IA) >> Component Description >> Body Control Module (BCM)

Body Control Module (BCM)

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

The BCM-B  determines the vehicle ignition mode based on the ignition switch input. The BCM-B  communicates the ignition mode to the other modules over the MS-CAN  and the HS-CAN  . The BCM-B  monitors the ignition switch input and the ignition mode outputs, if a fault is detected in the ignition system DTCs  are set by the BCM-B  .

For BCM-B  functions, REFER to PASSIVE ANTI-THEFT SYSTEM (PATS) - WITHOUT INTELLIGENT ACCESS , BCM-B  .

scientia non olet · About LEMON Manuals