Section 8 (Battery, Charging System And Starting System - Hybrid)

• Specifications
  • Fastener Specifications
• Schematic Wiring Diagrams
  • Starting and Charging Wiring Schematics
    • 12V Battery Management
• Diagnostic Information and Procedures
  • DTC B1325, B1330, B1420, B1424, B1517, C0800, C0895, C0899, C0900, C12E1, C12E2, P0560, P0562 or P0563: Device Power Circuit Voltage
    • Diagnostic Instructions
    • DTC Descriptors
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Diagnostic Aids
    • Reference Information
    • Circuit/System Verification
    • Circuit/System Testing
    • Repair Instructions
  • DTC B1516: Battery Current Sensor
    • Diagnostic Instructions
    • DTC Descriptors
    • Diagnostic Fault Information
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Diagnostic Aids
    • Reference Information
    • Circuit/System Testing
    • Repair Instructions
  • DTC B1527: Parasitic Load
    • Diagnostic Instructions
    • DTC Descriptor
    • Circuit/System Description
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verification
  • DTC P0A8D-P0A8F
    • Diagnostic Instructions
    • DTC Descriptors
    • Circuit/System Description
    • Conditions for Running The DTC
    • Conditions for Setting the DTC
    • Action Taken When the DTC Sets
    • Conditions for Clearing the DTC
    • Diagnostic Aids
    • Reference Information
    • Circuit/System Testing
  • DTC P0AF7
    • Diagnostic Instructions
    • DTC Descriptor
    • Conditions for Running the DTC
    • Conditions for Setting the DTC
    • Actions Take When the DTC Sets
    • Conditions for Clearing the DTC
    • Reference Information
    • Circuit/System Verifcation
    • Repair Instructions
  • Symptoms - Engine Electrical
    • Notes
    • Visual/Physical Inspection
    • Intermittent
    • Symptom List
  • Battery Inspection/Test
    • Diagnostic Instructions
    • Diagnostic Aids
    • Reference Information
    • Circuit/System Testing
    • Repair Instructions
  • Battery Charging
    • Notes
    • Battery State of Charge
    • Charging Time Required
    • Charging Procedure
  • Battery Electrical Drain/Parasitic Load Test
    • 12 V Battery
    • Diagnostic Instructions
    • Circuit/System Description
    • Diagnostic Aids
    • Reference Information
    • Circuit/System Verification
      • Notes
      • Using an Inductive Pickup Probe
      • Using the EL 38758 Parasitic Draw Test Switch
    • Circuit/System Testing
    • Repair Instructions
  • Charging System Test
• Repair Instructions
  • Battery Negative Cable Disconnection and Connection (HP4)
  • Battery Negative Cable Replacement
    • Removal Procedure
    • Installation Procedure
  • Auxiliary Battery Negative Cable Replacement (HP4)
  • Battery Positive Cable Replacement (High Voltage Battery to APM Module)
    • Notes
    • Removal Procedure
    • Installation Procedure
  • Battery Positive Cable Replacement (Rear Battery to APM Module)
  • Battery Replacement (HP4)
    • Removal Procedure
    • Installation Procedure
• Description and Operation
  • Charging System Description and Operation
    • 12-V Battery
    • Electrical Power Management (EPM) Overview
    • Charging System Components
    • Charging System Operation
    • Battery Sulfation Mode
    • Normal Mode
    • Fuel Economy Mode
    • Headlamp Mode
    • Voltage Reduction Mode
    • Plant Assembly Mode
    • Instrument Panel Cluster (IPC) Operation