Circuit/System Verifcation

1. Visual/Physical Inspection - Hybrid/EV Battery Pack Cooling Fan - Inlet and Outlet Hose
2. Inspect for obstructions - Inlet and Outlet Hose
   • If the specified state 
3. Repair or replace as necessary.
   • Go to next step: If not the specified state 
4. Hybrid/EV Battery Pack Cooling Fan - Ensure that all ducts have been routed, installed and secured properly. - Inspect for obstructions
   • If not the specified state 

     Repair or replace as necessary. - Service the system when it is cool.

   • Go to next step: If the specified state 
5. Ignition On
6. Verify DTC P0AF7 is not set.
   • If the DTC is set 

     Replace the appropriate component: K1 14V Power Module

   • Go to next step: If the DTC is not set 

All OK.