Removal Procedure
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
- Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Trax)Front Bumper Fascia Replacement (Encore) .
- Drain the coolant fluid. Refer to Cooling System Draining and Filling .
- Recover the air conditioning refrigerant. Refer to Refrigerant Recovery and Recharging (R-134a) .
- Remove the radiator outlet hose from the radiator. Refer to Radiator Outlet Hose Replacement (LUV) .
- Remove the radiator inlet hose from the radiator. Refer to Radiator Outlet Hose Replacement (LUV) .
- Remove the center support bracket. Refer to Front Bumper Fascia Center Support Replacement .
- Remove the front bumper lower impact bar. Refer to Front Bumper Lower Impact Bar Replacement (Trax) .
- Remove the radiator air upper baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement (LUV) .
- Remove the radiator air lower baffle and deflector. Refer to Radiator Air Lower Baffle and Deflector Replacement (LUV) .
- Remove the charge air cooler. Refer to Charge Air Cooler Replacement .
- Remove the condenser. Refer to Air Conditioning Condenser Replacement (LUV) .
- Disconnect the coolant fan wiring harness connector (1).
- Remove the temperature sensor from the radiator. Refer to Engine Coolant Temperature Sensor Replacement (Water Outlet)Engine Coolant Temperature Sensor Replacement (Radiator) .
- Remove both radiator upper brackets. Refer to Radiator Upper Bracket Replacement (LUV) .
- Remove the radiator (1) downward, and place the radiator on the table.
- Remove the engine cooling fan retaining bolts (1).
- Remove the engine cooling fan (2) from the radiator (3).