Section 3 (2.0L - Turbo Engine Mechanical, Engine Code(S): BPG, BWT)
WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- 00 - General, Technical Data
- 10 - Engine - Assembly
- Engine, removing and installing
- Overview of component locations
- Overview of component locations
- Notes
- Fuel Pressure Sensor G247, (torque specification 15 Nm)
- Camshaft Position (CMP) Sensor G40
- Mass Air Flow (MAF) Sensor G70
- Camshaft Adjustment Valve 1 N205 and Fuel Pressure Regulator Valve N276
- Intake Air Temperature (IAT) Sensor G42 Throttle Valve Control Module J338
- Fuel Pump (FP) Control Module J538
- Electrical harness connectors
- Oxygen sensors
- Installed location of Engine Control Module (ECM) J623
- Engine Coolant Temperature (ECT) Sensor G62
- Installed location Brake light switch F and Brake pedal switch F47 , Clutch pedal switch F36
- Installed location in 4-socket relay carrier, plenum chamber E-box
- Installed location on 9-socket relay carrier in driver footwell
- Component locations beneath intake manifold
- Charge Air Pressure Sensor G31
- Components on turbocharger
- Overview of component locations
- 13 - Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Sealing flanges and flywheel/drive plate, removing and installing
- Crankshaft, removing and installing
- Piston and connecting rod, disassembling and assembling
- 15 - Engine - Cylinder head, Valvetrain
- 17 - Engine - Lubrication
- Lubrication system components, removing and installing
- Oil filter bracket, component overview
- 19 - Engine - Cooling system
- Cooling system components, removing and installing
- Cooling system components, removing and installing
- Coolant hose connection diagram
- Cooling system, draining and filling
- Coolant distribution housing with Map Controlled Engine Cooling Thermostat F265 , assembly overview
- Thermostat
- Map Controlled Engine Cooling Thermostat F265 , removing and installing
- Map Controlled Engine Cooling Thermostat F265 , checking
- Coolant pump, removing and installing
- Coolant pipe, removing and installing
- Radiator, removing and installing
- Fan shroud, removing and installing
- Coolant fan, removing and installing
- Coolant fan motor, replacing
- Cooling system, checking for leaks
- Cooling system components, removing and installing
- 21 - Turbocharger, G-Charger
- Turbocharger
- Turbocharger
- Hose connections with connection couplings, assembly
- Turbocharger, component overview
- Turbocharger, removing and installing
- Exhaust turbocharger vacuum diaphragm, checking
- Vacuum diaphragm for turbocharger, removing and installing
- Vacuum diaphragm for turbocharger, adjusting
- Charge air cooler, component overview
- Left and right charge air coolers, removing and installing
- Charge Air Pressure Sensor G31 , removing and installing
- Turbocharger
- 26 - Exhaust system, Emission controls
- Exhaust system components, removing and installing