LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (2.0L - Turbo Engine Mechanical, Engine Code(S): BPG, BWT) >> 13 - Engine - Crankshaft, Cylinder Block >> Piston and connecting rod, disassembling and assembling >> Piston and connecting rod, disassembling and assembling >> Installed position of bearing shell

Installed position of bearing shell

WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installation Position Of Bearing Shells
GW00000055Courtesy of VOLKSWAGEN UNITED STATES, INC.

Bearing shell - 1  - with connecting rod oil bore - arrow  -.

Bearing shell - 2  - without connected rod cover oil bore.

Dimension - a  - must be the same at left and right.

scientia non olet · About LEMON Manuals