Crankshaft dimensions
WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
(Dimensions in mm)
| Honing dimension | Crankshaft bearing pins-diameter | Connecting rod pins-diameter |
|---|---|---|
| -0.017 | -0.022 | |
| Basic dimension | 54.00 | 47.80 |
| -0.037 | -0.042 | |
| -0.017 | -0.022 | |
| 1st oversize | 53.75 | 47.55 |
| -0.037 | -0.042 | |
| -0.017 | -0.022 | |
| 2nd oversize | 53.50 | 47.30 |
| -0.037 | -0.042 | |
| -0.017 | -0.022 | |
| Stage III | 53.25 | 47.05 |
| -0.037 | -0.042 |