LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (2.0L - Turbo Engine Mechanical, Engine Code(S): BPG, BWT) >> 26 - Exhaust system, Emission controls >> Exhaust system components, removing and installing >> Exhaust system components, removing and installing

Exhaust system components, removing and installing

WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Decoupling element in front exhaust pipe must not be bent more than 10 ° , otherwise it may be damaged
  • Replace gaskets and self-locking nuts.
  • After exhaust system repairs, make sure exhaust system is not under stress and is far enough from the body. If necessary, loosen clamping sleeve and align muffler and exhaust pipe so that there is adequate distance to body and that weight is evenly distributed among the suspended mounts.
  • The exhaust manifold and the turbocharger are one component, removing and installing → Turbocharger, removing and installing 
scientia non olet · About LEMON Manuals