Section 24 (2X Petrol, Exhaust, Engine-Electric - General 2.9L Turbo Hybrid -- 971 - PANAMERA (971))

• WM, 2X00 3D PDF Exhaust System
• WM, 2X00 3D PDF Fuel System
• WM, 2X00 3D PDF Injection Sensors Actuators
• WM, 2X00IN Technical Values (V6 Turbo)
  • Technical Values
    • Overview
    • Aluminum Screws
  • Information 20 - Fuel Supply, Control
    • Fuel Tank, Tank Ventilation
    • Carbon Canister
  • Information 21 - Turbocharging
    • Turbocharger (V6 Biturbo)
    • Vacuum System (Monoturbo)
    • Vacuum System (Biturbo)
    • Pressure Pipe And Intake Manifold (V6 Biturbo)
  • Information 24 - Fuel System, Electronic Fuel Injection
    • Air Filter
    • Intake-Air Distributor (V6 Biturbo)
    • Vacuum System (V6 Biturbo)
    • Vacuum System (V6 Mono-Turbo)
    • Oxygen Sensors
    • Injection System
    • Overview Of Shield For High-Pressure Pump
    • Tightening Sequence For High-Pressure Fuel Lines
  • Information 26 - Exhaust System
    • Exhaust System
    • Catalytic Converter And Particle Filter (Biturbo)
    • Particle Filter With Lines And Sensors
    • Heat Shield On Turbocharger
  • Information 27 - Starter, Power Supply
    • Generator
  • Information 28 - Ignition System
    • Ignition
• WM, 2X00IN Work Instructions After Disconnecting The Battery
  • Effect S Of Disconnection Or Total Discharge Of Battery On Electrical Systems In The Vehicle And Precautions To Be Taken
  • Test Drive After Disconnecting Battery
• WM, 2X00IN Isolation From Power Supply Prior To Performing Maintenance Tasks On E-Hybrid Vehicles
  • General Information
  • Isolation From Power Supply Prior To Performing Maintenance Tasks On E-Hybrid Vehicles
    • Isolation From Supply Prior To Performing Maintenance Tasks On E-Hybrid Vehicles
      • Notes
      • Work On The High-Voltage System
      • Conventional Work Close To High-Voltage Components
      • General Work
• WM, 2X00IN Handling Lithium-Ion Batteries
  • Tools
  • General Information
  • Classification - Interim Storage - Packaging - Transport
    • Classification
    • Handling Lithium-Ion Batteries In The Porsche Centre
    • Packaging And Transport
• WM, 2X00IN Isolating/Starting Up The High-Voltage System
  • Tools
  • General Information
    • General Warning Notices
    • Isolating High-Voltage System From Power Supply
    • Isolating High-Voltage System From Power Supply Manually
  • Starting The High-Voltage System
    • Starting High-Voltage Module
• WM, 2X00IN Test Log For The Classification Of Lithium-Ion High-Voltage Batteries
  • Tools
  • Classification
  • General Information
  • Result Of Classification And Signature
  • A) High-Voltage Battery Still In Vehicle At The Beginning
    • Initial Visual Assessment
    • Functional And Thermal Assessment
    • Detailed Visual Assessment After Removing The High-Voltage Battery
    • B) High-Voltage Battery Already Out Of Vehicle At The Beginning
      • Initial Visual Assessment
    • Thermal Assessment
    • Detailed Visual Assessment
    • Detailed Functional And Thermal Assessment
  • Transport
    • Transport Assessment
• WM, 2X00IN Packing Critical High-Voltage Battery
  • Tools
  • General Information
  • General Information On The Packaging Concept
  • Preliminary Work For Packing The High-Voltage Battery
  • Packing Critical High-Voltage Battery
• WM, 2X00IN Technical Values For High-Voltage Battery
  • Technical Values
  • Information
    • Technical Values For High-Voltage Battery
• WM, 2X00IN Specifications For Preparing A High-Voltage Workplace
  • Tools
  • General Information
  • Specifications For Preparing A High-Voltage Workplace
    • Notes
    • Specifications After Assembling A High-Voltage Battery
• WM, 2X00IN HV Comparison Sample Catalogue
  • General Information
  • Information
    • Hv Comparison Sample Catalogue
• WM, 2X00IN Technical Values (PHEV)
  • Technical Values
    • Overview
    • Technical Values - High-Voltage Battery Control Unit
    • Technical Values - Power Electronics For High-Voltage System
    • Technical Values For Vehicle Electrical System Battery
    • Technical Values For Battery Sensor
  • Technical Values For High-Voltage Lines
  • Technical Values - High-Voltage Line From High-Voltage Charger To PTC Heater
  • Technical Values - High-Voltage Line From Battery To Power Electronics
  • Technical Values For High-Voltage Battery
  • Technical Values For High-Voltage Charger
  • Technical Values For High-Voltage Charging Socket
    • Notes
    • Technical Values For Electric Motor
• WM, 2X00IN General Warning Notes For Working On The High-Voltage System
  • Tools
  • General Warning Notices
    • General Warning Notes For Working On The High-Voltage System
• WM, 2X00IN Rules Relating To Cleanliness And Instructions For Working On The Fuel System
  • Information
    • Rules Relating To Cleanliness And Instructions For Working On The Fuel System
• WM, 2X00IN Basic Safety Instructions For Working With The Fuel System
  • Safety Instructions
    • Safety Instructions When Working On The Fuel System
• WM, 2X00IN Test Log For Classification Of Lithium-Ion Module
  • Tools
  • Classification
  • General Information
  • Result Of Classification And Signature
  • Visual
    • Initial Visual Assessment
    • Detailed Visual Assessment
  • Thermal
    • Thermal Assessment
  • Functional
    • Functional Assessment
  • Transport
    • Transport Assessment
• WM, 2X00IN Insulation Fault Finding
  • Tools
  • General Information
  • Information On Insulation Fault Finding
  • Preliminary Work
  • Measurements
    • Measurement 1
  • Measurement 2 (High-Voltage Charger To Electric Passenger Compartment Heater)
    • Notes
    • Measurement 3 (High-Voltage Charger To A/C Compressor)
    • Measurement 4 (High-Voltage Charger To Charging Socket)
    • Measurement 5 (High-Voltage Charger To Electric Motor)
    • Measurement 7 (Electric Motor To Power Electronics)
• WM, 2X00IN Test Log: Pilot Line Fault Finding
  • Tools
  • Pilot Line Fault Finding
  • General Information
  • Function Test On High-Voltage Test Adapter Vas 6558/9-6, Vas 6558/9-7 (With MULTIMETER)
  • Pilot Line Test
• WM, 2X00IN Test Log: Insulation Fault Finding
  • Tools
  • Insulation Fault Finding
  • General Information
  • Function Test On High-Voltage Test Adapter Vas 6558/9-6, Vas 6558/9-7 (With MULTIMETER)
  • Insulation Test
• WM, 2X00IN Function Test On High-Voltage Test Adapter
  • Tools
  • General Information
  • Function Test On High-Voltage Test Adapter
    • Function Test On High-Voltage Test Adapter Vas 6558/9-6
    • Function Test On High-Voltage Test Adapters Vas 6558/9-7 And Vas 6558A/30
    • Function Test On High-Voltage Test Adapter Vas 6558A/38
• WM, 2X00IN Packing Lithium-Ion Module With Module Status "Warning" (Critical)
  • Tools
  • General Information
  • Packing Lithium-Ion Module With Module Status "Warning" (Critical)
• WM, 2X00IN Packing Lithium-Ion Module With Module Status "Normal" (Not Critical)
  • Tools
  • General Information
  • Packing Lithium-Ion Module With Module Status "Normal" (Not Critical)
• WM, 2X00IN Short-Circuit Test On High-Voltage Auxiliary Heater
  • Tools
  • General Information
  • Information: Performing Short-Circuit Test
    • Performing Short-Circuit Test
• WM, 2X00IN Test Log: Starting The High-Voltage System
  • Tools
  • Restarting High-Voltage System
  • Completing Documentation
  • Additional Check (Visual Inspection)
  • Additional Check (Function Test)
  • Fault Memory Entries
    • The Following Systems Must Be Free Of Faults And Must Not Contain Any Fault Entries
• WM, 2X00IN High-Voltage Topology
  • Overview
• WM, 2X00IN Packing Non-Critical High-Voltage Battery
  • Tools
  • Preliminary Work
  • Packing High-Voltage Battery In Transport Box
• WM, 2X00IN Battery Trickle Charge
  • Tools
  • Tools And Materials
  • Checking Charge State With Battery Tester
  • Information
  • Connecting The Battery For Trickle Charging
• WM, 2X00IN Classification Of A High-Voltage Battery
  • Tools
  • Information
    • Installation Position Of High-Voltage Battery
    • General Warning Notices
  • Classification Of A High-Voltage Battery
    • High-Voltage Battery Out Of Vehicle At The Beginning
  • Quarantine Of A High-Voltage Battery
    • Quarantine Of A High-Voltage Battery In The Vehicle
• WM, 2X00IN Handling Specifications For 12 V/48 V Lithium-Ion Batteries
  • Handling Specifications For 12 V/48 V Lithium-Ion Batteries
• WM, 2X00IN Test Log: Verifying Absence Of Electric Charge
  • Tools
  • General Intimation
  • Performing Automatic Verification Of Absence Of Electric Charge Using The PIWIS Tester
  • Function Test On High-Voltage Test Adapter (With MULTIMETER)
  • MEASUREMENT IN HV DC CIRCUIT AS PER Service Information
  • Marking And Signature
• WM, 2X00IN Work Instruction For 48 V Vehicle Electrical System
  • Technical Values
  • General Information
  • Information
    • Component Overview And Handling Of 48 V Vehicle Electrical System
  • Disconnecting And Starting 48 V Vehicle Electrical System
    • Disconnecting 48 V Vehicle Electrical System
    • Starting The 48 V Vehicle Electrical System
• WM, 2X00IN Pilot Line Troubleshooting
  • Tools
  • General Information
  • Information On Pilot Line Troubleshooting
    • Information On Pilot Line Fault Finding
  • Preliminary Work
  • Performing Measurements
    • Measurement 1
      • Preliminary Work For Measurement 1
    • Measurement 2
      • Preliminary Work For Measurement 2
    • Measurement 3
      • Preliminary Work For Measurement 3
    • Measurement 4
      • Preliminary Work For Measurement 4
    • Measurement 5
      • Preliminary Work For Measurement 5
    • Measurement 6
      • Preliminary Work For Measurement 6
• WM, 2X00IN Precautionary Measures When Handling Oxygen Sensors
  • Information
    • Specifications When Handling Oxygen Sensors