Insulation Fault Finding
WARNING: This page is about a different variant/trim than selected.
WARNING:
Incorrect handling of high-voltage components
- Electric shock
- Short circuit
- Fire
- Explosion
→ Only appropriately trained and authorized persons may work on high-voltage vehicles and components.
→ Required qualification: High voltage technician or high voltage expert.
→ Observe national requirements and legislation for this work.
→ Always use insulated tools, such as an > VAS 6883 - insulated tool set when working on these parts.
→ Observe general warning notices for working on the high-voltage system.
→ 2X00IN General warning notices for working on the high-voltage system
Information
- Use > 9900 - PIWIS Tester 3 with > VAS 6558A - high-voltage testing module and the test adapters > VAS 6558/9-6A - high-voltage test adapter , > VAS 6558A/30 - HV test adapter , > VAS 6558A/38 - HV test adapter , > VAS 6558A/40 - HV test adapter to perform the measurements for the insulation test.