Pilot Line Fault Finding
WARNING: This page is about a different variant/trim than selected.
WARNING:
Incorrect handling of high-voltage components
- Electric shock
- Short circuit
- Fire
- Explosion
→ Only appropriately trained and authorized persons may work on high-voltage vehicles and components.
→ Required qualification. High voltage technician or high voltage expert.
→ Observe national requirements and legislation for this work.
→ Always use insulated tools, such as an > VAS 6883 - insulated tool set when working on these parts.
→ Observe general warning notices for working on the high-voltage system.
→ 2X00IN GENERAL WARNING NOTICES FOR WORKING ON THE HIGH-VOLTAGE SYSTEM
Information
- Use > V.A.G 1526E - Handheld multimeter , > 9684 - measurement tool set , > VAS 6558/9-6 - High-voltage test adapter HVA 280 , > VAS 6558/9-7 - High-voltage test adapter HVR 40 to perform the measurements.