Section 3449 (Fuel System - Repair (N63; ACTIVEHYBRID))
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
- Safety Information
- Fuel Pump With Drive And Line
- Injection Pump, Regulator, Mixture Regulator
- Injection Nozzle And Lines
- 13 53 170 Removing and installing/replacing all pressure lines (N63 hybrid)
- 13 53 310 Removing and installing/replacing an injector (N63 hybrid)
- 13 53 332 Removing and installing/replacing feed line (N63 hybrid)
- 13 53 205 Removing and installing/replacing left rail (N63 hybrid)
- 13 53 208 Removing and installing/replacing right rail (N63 hybrid)
- 13 53 594 Replacing fuel low-pressure sensor (N63)
- 13 53 602 Replacing left high-pressure fuel sensor (N63 hybrid)
- 13 53 602 Replacing right high-pressure fuel sensor (N63 hybrid)
- Throttle And Operation
- Sensor For Control Unit
- 13 62 591 Removing and installing/replacing brake pressure sensor on left after cooler (N63 hybrid)
- 13 62 560 Removing and installing/replacing left or right air-mass flow sensor (N63 hybrid)
- 13 62 593 Removing and installing/replacing pressure sensor on left intake plenum (N63 hybrid)
- 13 62 594 Removing and installing/replacing pressure sensor on right intake plenum (N63 hybrid)
- 13 62 592 Removing and installing/replacing pressure sensor on right intercooler (N63 hybrid)
- 13 62 531 Replacing coolant temperature sensor (N63 hybrid)
- Intake Silencer
- Air Cleaner
- Carbon Canister Ventilation