13..... Remove intake part (N63 hybrid)

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: High-voltage system - danger to life!

WARNING: The following points must be strictly observed prior to starting work:

DE-ENERGIZE THE HIGH-VOLTAGE SYSTEM
Observe SAFETY INSTRUCTIONS for handling with hybrid vehicles

Necessary preliminary tasks:

Remove COVER from electronics box power module
Remove AUXILIARY POWER MODULE (APM)

NOTE: Illustration shows N63 engine.

Release expanding rivets (1). Pull off air intake hose (2) upwards.

Fig 1: Removing Air Intake Hose

Courtesy of BMW OF NORTH AMERICA, INC.

Press in catch (1). Pull off air intake hose (2) in direction of travel.

Fig 2: Pulling Off Intake Hose

Courtesy of BMW OF NORTH AMERICA, INC.