Section 352 (Engine Lubrication, Engine Oil Cooling - 253 Chassis)
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
- Description & Operation
- General Information
- Basic Knowledge
- Safety Precautions
- Testing & Repair
- Determine Engine Oil Consumption
- Measure Engine Oil Consumption
- Check Engine Oil Pressure
- Remove/Install Engine Oil Spray Nozzles (Pistons)
- Remove/Install Engine Oil Pump
- Tighten Bolts On Heat Exchanger - AR18.30-P-6841-01MRH
- Remove/Install Heat Exchanger
- Replace Seal On Engine Oil Dipstick Guide Tube - AR18.40-P-0815-01MR
- Remove/Install Engine Oil Dipstick Guide Tube - AR18.40-P-3510MRA
- Remove/Install Engine Oil Level Check Switch - AR18.40-P-5113MRA
- Remove/Install Engine Oil Fill Level Sensor - AR18.40-P-5116MRI
- Test & Adjustment Values
- Maintenance
- Capacities & Specifications
- Torque Specifications
- Engine Lubrication, Engine Oil Cooling, General - BA18.00-P-1000-01D
- Engine Lubrication, Oil Cooling System - BA18.00-P-1000-02B
- Tightening Torques: Passenger Cars: Engine Lubrication, Engine Oil Cooling - BA18.00-Z-9999AZ
- Engine Oil Pump
- Engine Oil Filter
- Engine Oil Cooling
- Engine Oil Level/Oil Pressure Sensor - BA18.40-P-1000-01I
- Engine Oil Sensor - BA18.40-P-1000-02E
- Fill Level Sensor, Engine Oil Pressure Sensor - BA18.40-P-1000-03B
- Special Tools