Testing and repair work: Passenger cars: Front axle - AR33.00-Z-9216AA
MODEL 216
| Adjust wheel bearing play | MODEL 212, 216, 218, 221... | AR33.20-P-0300SX |
| Attach engine hoist | MODEL 221, 216 | AR33.10-P-0105SX |
| Checking follower joint of steering knuckle mount (installed) | MODEL 221.0/1 MODEL 216 | AR33.20-P-0426SX |
| Inspect front axle joint for play, inspect rubber boots | MODEL 216, 221 | AR33.00-P-3000SX |
| Install new radial sealing ring on outside right of front axle gear | MODEL 204.08/09/28/29/98/99, 212.08/09/28/29, 218.39 MODEL 216, 221 with 4MATIC | AR33.30-P-0540SYZ |
| Remove/install boots on front axle shaft | MODEL 203, 204, 211, 212, 216, 218, 220, 221 Inside boot | AR33.30-P-0690CW |
| Remove/install boots on front axle shaft | MODEL 203, 204, 211, 212, 216, 218, 220, 221... | AR33.30-P-0690T |
| Remove/install front axle | MODEL 221, 216 without 4MATIC | AR33.10-P-0100SX |
| Remove/install front axle | MODEL 221, 216 with 4MATIC | AR33.10-P-0100SYZ |
| Remove/install front axle carrier | MODEL 216, 221... | AR33.10-P-0001SX |
| Remove/install front axle carrier | MODEL 221, 216 with 4MATIC | AR33.10-P-0001SYZ |
| Remove/install front axle gear | MODEL 221, 216 with 4MATIC | AR33.30-P-0525SYZ |
| Remove/install front axle half | MODEL 221.0/1 MODEL 216 | AR33.10-P-0200SX |
| Remove/install front axle shaft flange and double-row angular ball bearing | MODEL 204, 212, 216, 218, 221... | AR33.20-P-0315SYZ |
| Remove/install front axle shafts | MODEL 216, 221 with 4MATIC | AR33.30-P-0620SYZ |
| Remove/install front wheel hub | MODEL 212, 216, 218, 221... | AR33.20-P-0310SX |
| Remove/install intermediate shaft and replacing deep-groove ball bearing | MODEL 221, 216 with 4MATIC | AR33.30-P-0625SYZ |
| Remove/install pinion housing with drive pinion | MODEL 204.08/09/28/29/98, 212.08/09/28/29, 218.39 MODEL 216, 221 with 4MATIC | AR33.30-P-0469SYZ |
| Remove/install spring control arm on front axle | MODEL 221.0/1, 216 with CODE (487) Active Body Control (ABC) | AR33.15-P-0170SY |
| Remove/install spring control arm on front axle | MODEL 221, 216 with 4MATIC | AR33.15-P-0170SYZ |
| Remove/install steering knuckle | MODEL 216, 221... | AR33.25-P-0400SX |
| Remove/install steering knuckle | MODEL 221.08/18 MODEL 221.09/19 Vehicles with 4MATIC MODEL 216.38/39 |
AR33.25-P-0400SYZ |
| Remove/install torque strut at front axle | MODEL 221.0/1 MODEL 216 | AR33.15-P-0160SX |
| Remove/install upper control arm | MODEL 221.0/1 except CODE (Z07) Top protection MODEL 216 | AR33.20-P-0500SX |
| Replace sealing ring on drive pinion | MODEL 204.08/09/28/29/98, 212.08/09/28/29, 218.39 MODEL 216, 221 with 4MATIC | AR33.30-P-0530SYZ |
| Seal front axle transmission | MODEL 204.08/09/28/29/98, 212.08/09/28/29, 218.39 MODEL 216, 221 with 4MATIC | AR33.30-P-0542SYZ |