LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1996 >> E320 >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Mixture Formation - Self-Diagnostic System - 210 Chassis (Part 2) >> Self-Diagnostic System >> ME-SFI gasoline injection system - Check electrics - AD07.61-P-6000C

ME-SFI gasoline injection system - Check electrics - AD07.61-P-6000C

ENGINES 104.941 /943 /944 /991 /994 as of 1.8.96 

ENGINE 104.995 with CODE (494a) USA version with CODE (807) Model year 1997 with CODE (808) Model year 1998 with CODE (498) as of Model Year 97 Japanese version 

DANGER Hazard  from contact with parts conducting high voltages. Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry out work on the ignition system. AS15.10-Z-0001-01A
DANGER Lethal hazard  from being drawn into rotating vehicle parts Do not reach into rotating parts.
Wear closed and close-fitting work clothes.
Secure area of rotating vehicle components against unauthorized access.
AS00.00-Z-0004-01A
DANGER Risk of explosion  from fuel igniting, risk of poisoning  from inhaling and swallowing fuel as well as risk of injury  to eyes and skin from contact with fuel. No fire, sparks, naked flames or smoking.
Pour fuels only into suitable and appropriately marked containers.
Wear protective clothing when handling fuel.
AS47.00-Z-0001-01A
NOTES Notes regarding the avoidance of damage to the ignition system Engines 104, 111, 112, 113, 119, 120 with ME-SFI fuel injection and ignition system AH15.10-P-0002-01D
  ME-SFI gasoline injection and ignition system - Diagnosis previous knowledge   AD07.61-P-2000C
  Connection and use of testing equipment   AD00.00-P-1000AZ
  Connect Hand-Held-Tester (HHT), read diagnostic fault code memory out   AD00.00-P-2000-03A
IMPORTANT When disconnecting the couplings at the ME-SFI control, first disconnect the center coupling, and connect the center coupling D last of all on connection.    
IMPORTANT Measuring apparatus/test connection column:
The numbers entered in brackets such as, e.g. ==>
1.0 (2A) mean:
A = Coupling A in the wiring diagram
2 = Bushing 2 in the wiring diagram
   
a Ignition: OFF     
b Connect the test lead kit with socket box at the ME-SFI control module (N3/10) according to the connection schematic IMPORTANT The plug marked in red is not yet required at present, as no function is available in the ME-SFI control module as yet AD07.61-P-2000-01A
  Check     
1 ME-SFI control module terminal 30 - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-01C 
2 ME-SFI control module terminal 87 - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-02C 
3 Starter signal terminal 50 - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-41A 
4 Starting relay - Check ME-SFI gasoline injection electrics 104.941 as of 1.8.96 with transmissions 722.4/6 AD07.61-P-6000-03C 
5 Hot-film mass air sensor - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-04C 
6 Intake air temperature sensor - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-05A 
7 Pressure sensor - Check ME-SFI gasoline injection electrics USA ONLY AD07.61-P-6000-06B 
8 Fuel pump relay - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-07C 
9 Coolant temperature sensor - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-08A 
10 ME-SFI control module speed signal - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-09B 
11 Oxygen sensor signal in front of TWC - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-42A 
12 Oxygen sensor heater in front of TWC - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-43A 
13 Oxygen sensor signal after TWC - Check ME-SFI gasoline injection electrics USA ONLY AD07.61-P-6000-44A 
14 Oxygen sensor heater after TWC - Check ME-SFI gasoline injection electrics USA ONLY AD07.61-P-6000-45A 
15 Fuel injector (Y62/1) - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-18B 
16 Fuel injector (Y62/2) - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-19C 
17 Fuel injector (Y62/3) - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-20C 
18 Fuel injector (Y62/4) - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-21C 
19 Fuel injector (Y62/5) - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-22C 
20 Fuel injector (Y62/6) - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-23C 
21 Secondary air injection relay - Check ME-SFI gasoline injection electrics USA ONLYJAPAN ONLYTIWAN ONLYKOREA ONLY and low-emission D3 as of 07/97 AD07.61-P-6000-24C 
22 Air pump change-over valve Check ME-SFI gasoline injection electrics USA ONLYJAPAN ONLYTIWAN ONLYKOREA ONLY and low-emission D3 as of 07/97 AD07.61-P-6000-25B 
23 Secondary air injection Check ME-SFI gasoline injection electrics USA ONLYJAPAN ONLYTIWAN ONLYKOREA ONLY and low-emission D3 as of 07/97 AD07.61-P-6000-26B 
24 Resonance intake manifold change-over valve - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-28B 
25 Camshaft control electromagnetic actuator - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-46A 
26 Camshaft control - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-47A 
27 Regeneration change-over valve actuation - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-29B 
28 Regeneration change-over valve vacuum control - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-30B 
29 Regeneration system - Check ME-SFI gasoline injection electrics 104.941/944/994 as of 1.8.96 USA ONLY
104.995 USA ONLY
with CODE (807) model year 1997
with CODE (808) model year 1998 as of model year 97 JAPAN ONLY
104.943/991 as of 1.9.97
AD07.61-P-6000-31B 
30 Activated charcoal container shut-off valve - Check ME-SFI gasoline injection electrics 104.941/944/994 as of 1.8.96 USA ONLY
104.995 JAPAN ONLY
with CODE (807) model year 1997
with CODE (808) model year 1998 as of model year 97 JAPAN ONLY
104.943/991 as of 1.9.97
AD07.61-P-6000-32B 
31 Tank pressure sensor - Check ME-SFI gasoline injection electrics 104.941/944/994 as of 1.8.96 USA ONLY
104.995 USA ONLY
with CODE (807) model year 1997
with CODE (808) model year 1998 as of model year 97 JAPAN ONLY
104.943/991 as of 1.9.97
AD07.61-P-6000-33B 
32 Regeneration monitoring pressure sensor Check ME-SFI gasoline injection electrics 104.941/943/991 up to 31.8.97 USA ONLY AD07.61-P-6000-48A
33 CAN data bus - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-34B 
34 Oil level check switch - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-49A 
35 Diagnostic lead - Check ME-SFI gasoline injection electrics   AD07.61-P-6000-37A