ME-SFI fuel injection and ignition system, diagnostics, previous knowledge - AD07.61-P-2000C
ENGINES 104.941 /943 /944 /991 /994 as of 1.8.96
ENGINE 104.995
with CODE (494a) USA version
with CODE (807) Model year 1997
with CODE (808) Model year 1998
with CODE (498) as of Model Year 97 Japanese version
| Hazard from contact with parts conducting high voltages. | Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry out work on the ignition system. | AS15.10-Z-0001-01A | |
| Lethal Hazard from being drawn into rotating vehicle parts | Do not reach into rotating parts. Wear closed and close-fitting work clothes. Secure area of rotating vehicle components against unauthorized access. |
AS00.00-Z-0004-01A | |
| Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel. | No fire, sparks, naked flames or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| Notes on preventing damage to the ignition system | Engines 104, 111, 112, 113, 119, 120 with ME-SFI fuel injection and ignition system | AH15.10-P-0002-01D | |
| When unplugging the couplings on the ME-SFI control module, the center coupling should be removed first and when plugging them back on the center coupling labeled D plugged in last. | |||
| ME-SFI fuel injection and ignition system, location of components | 104.943/991 as of 1.8.96 | GF07.61-P-0001-01C | |
| Model 140 with ENGINE 104 | GF07.61-P-0001-01D | ||
| Model 202 with ENGINE 104 | GF07.61-P-0001-01E | ||
| MODEL 210 with ENGINE 104 with CODE (494a) USA version with CODE (498) Japanese version |
GF07.61-P-0001-01F | ||
| Electric wiring diagrams | Models 129, 140, 202, 210, groups 07 and 00 | PE07.00-P-1100A | |
| Test wiring harness for testing fuel injectors | WF58.50-P-0761-01A | ||
| Connection and use of testing equipment | AD00.00-P-1000AZ | ||
| Connect hand-held tester and read out DTC memory | AD00.00-P-2000-03A | ||
| Tools - ME-SFI fuel injection and ignition system - Check electrics | AD07.61-P-2000-06B | ||
| Notes on ME-SFI DTC memory | AD07.61-P-2000-10D | ||
| Notes on HHT - ME-SFI fuel injection and ignition system | AD07.61-P-2000-04A | ||
| Notes on testing CAN module for ME-SFI fuel injection system | AD07.61-P-2000-05A | ||
| Signal images ME-SFI fuel injection system | AD07.61-P-2000-03B | ||
| Signal images for ME-SFI ignition system | AD07.61-P-2000-07D | ||
| Coupling assignment for ME-SFI fuel injection and ignition system | AD07.61-P-2000-02C | ||
| Socket box connection diagram, ME-SFI, check electrics | AD07.61-P-2000-01A | ||
| Tools fuel pressures, ME-SFI, check hydraulics | AD07.61-P-2100-01A | ||
| ME-SFI fuel pressures test connection | AD07.61-P-2100-02C | ||
| Connect socket box for testing ME-SFI fuel pump | AD07.61-P-2200-02C | ||
| Tools fuel pump, ME-SFI, check hydraulics | AD07.61-P-2200-01B | ||
| Multimeter connection schematic, fuel pump, ME-SFI, check hydraulics | AD07.61-P-2200-03A | ||
| Tools fuel injectors, check hydraulics, ME-SFI | AD07.61-P-2300-01B | ||
| Spray pattern, check ME-SFI fuel injectors | AD07.61-P-2300-03B | ||
| Connect socket box for testing ME-SFI fuel injectors | AD07.61-P-2300-02C |