Section 267 (Automatic Transmission, Transfer Case And Power Transfer Unit - 6-Speed Automatic Transmission - 6R140 (1 Of 2))
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Lubricants, Fluids, Sealers and Adhesives
- Capacities
- General Specification
- Clutch Application Chart
- Solenoid Operation Chart
- Gear Ratio Chart
- Clutch Plate Quantity -- HC3P-7000-Transmissions
- Clutch Plate Quantity --HC4P-7000-Transmissions
- Clutch Clearance -- Diesel Engines
- Clutch Clearance -- Gas Engines
- Low/Reverse Clutch Measurement -- Gas/Diesel Engines
- Forward (1, 2, 3, 4), Direct (3, 5, R), and Intermediate (2, 6) Clutch Selective Snap Ring Chart
- Overdrive (4, 5, 6) Clutch Selective Snap Ring Chart
- Front Selective Shim Part Number Chart
- Rear Selective Shim Part Number Chart
- Shift Speeds -- Diesel Engines
- Shift Speeds -- Gas Engines
- Description And Operation
- Transmission Description - Overview
- Transmission Description
- Transmission Description - System Operation and Component Description
- Forward Clutch Assembly
- Direct Clutch Assembly
- Intermediate Clutch Assembly
- Low Reverse Clutch Assembly
- Overdrive Clutch Assembly
- Low One-Way Clutch Assembly
- Torque Converter
- Main Control Valve Body
- Pump Assembly
- Planetary Assembly
- Diagnosis And Testing
- Diagnostic Strategy
- Preliminary Inspection
- Road Testing Vehicle
- Leakage Inspection
- Parameter Identification (PID) Chart
- Diagnostic Trouble Code (DTC) Charts and Pinpoint Tests - 6.2L V8
- Diagnostic Trouble Code (DTC) Charts and Pinpoint Tests - 6.7L Power Stroke Diesel
- DTC Charts
- Pinpoint Tests
- Notes
- Pinpoint Test A : Transmission Control Solenoids
- Pinpoint Test B : TFT (Transmission Fluid Temperature) Sensor
- Pinpoint Test C : Tr Sensor
- Pinpoint Test D : TSS (Turbine Shaft Speed) Sensor
- Pinpoint Test E : OSS (Output Shaft Speed) Sensor
- Pinpoint Test F : U0100:00, U0115:00
- Pinpoint Test G : U0121:00
- Pinpoint Test H : U0140:00, U0141:00
- Pinpoint Test I : U0155:00
- Pinpoint Test J : DTC P2531
- Pinpoint Test K : DTC P2610