Section 45 (Engine Mechanical (Cylinder Head & VALVETRAIN System - Service Information - 2.0L - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA))

• 15 Cylinder Head, VALVETRAIN
  • Cylinder Head
    • Overview - Cylinder Head
      • Notes
      • Cylinder Head Plug
        • Notes
        • Cylinder Head Gasket Identification
      • Cylinder Head Tightening Specifications And Sequence
    • Overview - Cylinder Head Cover
      • Notes
      • Cylinder Head Cover Tightening Sequence
    • Cylinder Head, Removing And Installing
      • Notes
      • Removing
        • Notes
        • Loosen The Cylinder Head Bolts In The Sequence -1 To 10-.
      • Installing
      • Tightening Specifications
    • Cylinder Head Cover, Removing And Installing
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • Fuel Injector Seals, Removing And Installing
      • Notes
      • Procedure
    • Camshaft Housing, Removing And Installing
      • Notes
      • Removing
        • Notes
        • Loosen The Camshaft Housing Bolts In The Sequence: -18 To 1-.
      • Installing
      • Tightening Specifications
    • Compression, Checking
      • Notes
      • Procedure
  • Toothed Belt Drive
    • Overview - Toothed Belt Guard
    • Overview - Toothed Belt
    • Toothed Belt Guard, Removing And Installing
      • Upper Toothed Belt Guard, Removing And Installing
        • Removing
        • Installing
        • Tightening Specifications
      • Lower Toothed Belt Guard, Removing And Installing
        • Removing
        • Installing
        • Tightening Specifications
    • Toothed Belt, Removing And Installing
      • Notes
      • Removing
      • Installing (Adjusting Valve Timing)
      • Valve Timing, Checking
      • Valve Timing, Correcting
      • Continuation If The Valve Timing Is Correct
      • Tightening Specifications
    • Toothed Belt, Removing From Camshaft
      • Notes
      • Removing
  • VALVETRAIN
    • Overview - VALVETRAIN
      • Notes
      • Camshaft Housing Tightening Specifications And Sequence
      • Camshaft Adjuster Housing Tightening Specifications And Sequence
    • Camshaft, Measuring Axial Clearance
      • Notes
      • Procedure
    • Camshaft Seal, Removing And Installing
      • Notes
      • Procedure
    • Camshaft Adjuster, Removing And Installing
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING
      • Removing
      • Installing
      • Tightening Specifications
    • CONTROL VALVE FOR Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING
      • Notes
      • Installing
      • Tightening Specifications
    • Hydraulic Lifters, Checking
      • Notes
      • Procedure
    • Valve Stem Seals, Removing And Installing
      • Valve Stem Seals, Removing And Installing, Cylinder Head Installed
        • Notes
        • Procedure
      • Valve Stem Seals, Removing And Installing, Cylinder Head Removed
        • Notes
        • Procedure
  • Intake And Exhaust Valves
    • Valve Guides, Checking
      • Notes
      • Procedure
    • Valves, Checking
    • Valve Dimensions
  • Special Tools