LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (Engine Mechanical (Cylinder Head & VALVETRAIN System - Service Information - 2.0L - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Camshaft Adjuster, Removing And Installing >> Installing

Camshaft Adjuster, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.
CAUTION:

Between the camshaft adjuster and camshaft stub there is a diamond disc installed for connection security. Before installing, make sure that this diamond disc is in the camshaft adjuster. Otherwise the camshaft adjuster can become loose while the engine is running and damage the engine.

Install in reverse order of removal and note the following:

-- Install the upper toothed belt guard. Refer to TOOTHED BELT GUARD, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals