Section 219 (Final Drive, Differential - Manual Transmission 0A4 (Sedan) (A5 Platform))
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- 39 Final Drive, Differential
- General Information
- Description And Operation
- Specifications
- Removal And Installation
- Disassembly And Assembly
- Differential
- Notes
- Removing the Outer Race/Tapered Roller Bearing from the Clutch Housing
- Installing the Outer Race/Tapered Roller Bearing into the Clutch Housing
- Removing the Bearing Inner Race/Taper Roller Bearing
- Installing the Bearing Inner Race/Taper Roller Bearing
- Removing the Outer Race/Tapered Roller Bearing from the Transmission Housing
- Installing the Outer Race/Tapered Roller Bearing into the Transmission Housing
- Differentiating the Spring Pins
- Allocation, Differential Housing
- Roll Pin with Groove (short roll pin): Removing and Installing
- Removing the Spring Pin without Surrounding Groove (long spring pin): Removing the Differential Bevel Gear Axle
- Spring Pin without Surrounding Groove (long spring pin), Installing
- On Some Transmissions, the Thrust Washer Union has a Ridge -A-
- Installing the Differential Planetary Gears and Differential Bevel Gear Axle
- Installed Position: Tapered Ring Thrust Washer -1-
- Differential
- Special Tools