LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Final Drive, Differential - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 39 Final Drive, Differential >> Disassembly And Assembly >> Differential >> Removing the Bearing Inner Race/Taper Roller Bearing

Removing the Bearing Inner Race/Taper Roller Bearing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Tool Assembly To Pull Off Inner Races/Tapered Roller Bearing
GWWV39-1275Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Before installing the puller, set the 40 - 105 onto the differential housing.

NOTE:

Both tapered roller bearing inner races are pulled off from the differential housing in the same way.

scientia non olet · About LEMON Manuals