Spring Pin without Surrounding Groove (long spring pin), Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- Align the hole in the differential bevel gear axle to the hole in the differential housing.
-- Install the new adapter sleeve to dimension -a- = 3.0 mm using a mandrel -1-.
- The spring pin must not come in contact with the transmission when the differential housing is installed.