LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Final Drive, Differential - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 39 Final Drive, Differential >> Disassembly And Assembly >> Differential >> Installing the Outer Race/Tapered Roller Bearing into the Clutch Housing

Installing the Outer Race/Tapered Roller Bearing into the Clutch Housing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Outer Race/Tapered Roller Bearing Pressed Into Clutch Housing
GWWV39-1682Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

There is no adjusting shim on the side of the clutch housing.

scientia non olet · About LEMON Manuals