Special Tools

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Thrust Piece T10148
Spindle from Seal Installer Set - Rear Diff 3066
Additional Part for VW 771 VW 771/37
Punch VW 408 A
Thrust Piece VW 473
Press Support R & I Wheel Brg's 3144
Thrust Pad 2007
Torque Wrench (40-200 Nm) V.A.G 1332
Slide Hammer-Complete Set VW 771

Fig 1: Identifying Slide Hammer VW 771
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Thrust Piece T10160

Fig 2: Identifying Thrust Piece T10160
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Subframe Support Assembling Device 3253/2

Fig 3: Identifying Alignment Fixture 3253/2
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 4: Identifying Special Tools -- Differential, Adjusting

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Dial Gauge Holder VW 387
Magnetic Plate 50 mm Dia. VW 385/17
Punch VW 407
Thrust Pad 30 - 205
Torque Wrench (5-50 Nm) V.A.G 1331
-1- Kukko Extractor 46-58 mm 21/7
-4- Kukko Support 22/2

Fig 5: Identifying Special Tools -- Differential, Disassembling And Assembling

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Taper Roller Bearing Puller V.A.G 1582
Attachment to VAG 1582 V.A.G 1582/3
Thrust Disc VW 412
Thrust Plate VW 401
Thrust Plate VW 402