LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai XLE >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Panels / Trim - Service Information (1 Of 2) >> Instrument Panel Safety Pad >> Removal [11/2020 - 11/2021] >> Procedure

Removal [11/2020 - 11/2021]: Procedure

  1. PRECAUTION 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    WARNING:

    Be sure to read precaution thoroughly before servicing.

    Refer to PRECAUTION [11/2020 - 12/2022]

    GTY824211Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    NOTE:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal.

    Refer to BEFORE DISCONNECTING BATTERY [11/2020 - 11/2021]
  2. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 2
  3. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD 
  4. REMOVE STEERING WHEEL ASSEMBLY 

    Refer to REMOVAL [11/2020 - 11/2021]

  5. REMOVE CONSOLE BOX ASSEMBLY 

    Refer to REMOVAL [11/2020 - 11/2021] 

  6. REMOVE FRONT DOOR SCUFF PLATE LH 
    1. Use the same procedure described for the RH side.

      See step  10

  7. REMOVE NO. 1 INSTRUMENT SIDE PANEL 
    1. GTY1017363Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction (1) Remove in this Direction (2)
      1. Using moulding remover B, detach the clip and guide in the removal direction (1) as shown in the illustration.
      2. Detach the guide in the removal direction (2) as shown in the illustration and remove the No. 1 instrument side panel.
  8. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT 
    1. GTY1016681Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
  9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY 

    HINT: 

    The illustrations are representative examples, and details may differ.

    1. GTY1016707Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
  10. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 
    1. GTY1017525Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
  11. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 
    1. GTY1016844Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
  12. REMOVE INSTRUMENT PANEL FINISH PLATE 
    1. GTY1017485Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
  13. REMOVE INSTRUMENT CLUSTER FINISH PANEL END 

    HINT: 

    The illustrations are representative examples, and details may differ.

    1. GTY1017073Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape - -
    2. GTY1016407Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here Remove in this Direction (1)
      Remove in this Direction (2) Remove in this Direction (3)
  14. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 10
  15. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 HINT: 
    Pull back the front door opening trim weatherstrip LH so that the front pillar garnish assembly LH can be removed.
    Refer to PROCEDURE - Step 2
  16. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 HINT: 
    • Pull back the front door opening trim weatherstrip RH so that the front pillar garnish assembly RH can be removed.
    • Use the same procedure described for the LH side.
  17. REMOVE FRONT PILLAR GARNISH ASSEMBLY LH 
    1. GTY1016630Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Release Lever - -
      Remove in this Direction - -
      1. Detach the front pillar garnish assembly LH from the base of the front pillar garnish clip as shown in the illustration.
      2. While pushing the release lever of the front pillar garnish clip as shown in the illustration, detach it.
    2. When the front pillar garnish clip cannot be detached easily:
      GTY1017119Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Pull in this Direction - -
      1. While pushing the tab of the front pillar garnish clip shown in the illustration with your finger, move the front pillar garnish clip in the direction shown in the illustration.
      2. While pulling the front pillar garnish clip as shown in the illustration, push the release lever of the front pillar garnish clip shown in the illustration with a screwdriver and detach the front pillar garnish clip.
    3. GTY1016736Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 14 Speakers - -
      Remove in this Direction - -
      1. Detach the guide and remove the front pillar garnish assembly LH as shown in the illustration.
      2. for 14 Speakers:

        Disconnect the connector.

    4. Protect the curtain shield airbag assembly LH:
      GTY1017686Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Cover - -
      Adhesive Tape - -
      1. Cover the curtain shield airbag assembly LH with a protective cover, such as a cloth, and secure the edges of the cover with tape as shown in the illustration.
        NOTE:

        Cover the curtain shield airbag assembly LH with a protective cover as soon as the front pillar garnish LH is removed.

    5. GTY1017787Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 2 front pillar garnish clips from the front pillar garnish assembly LH.
  18. REMOVE FRONT PILLAR GARNISH ASSEMBLY RH 
    1. Use the same procedure described for the LH side.
  19. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL 
    1. GTY1016915Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction (1) Remove in this Direction (2)
  20. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL 
    1. GTY1017599Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction (1) Remove in this Direction (2)
  21. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET (w/ Navigation System) 

    Refer to PROCEDURE - Step 8

  22. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Navigation System) 
    1. GTY1016886Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
  23. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System) 

    Refer to PROCEDURE - Step 9

  24. REMOVE NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 6
  25. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL GARNISH 
    1. GTY1016487Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A w/ Interior Illumination - -
      Remove in this Direction - -
  26. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY 
    1. GTY1017716Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
  27. REMOVE POWER SWITCH 

    Refer to PROCEDURE - Step 2

  28. REMOVE NAVIGATION ECU ASSEMBLY WITH BRACKET (w/ Navigation System) 

    Refer to PROCEDURE - Step 2

  29. REMOVE SHIFT LOCK CONTROL UNIT ASSEMBLY 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 2
  30. REMOVE AIR CONDITIONING CONTROL ASSEMBLY 

    Refer to PROCEDURE - Step 3

  31. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System) 

    Refer to PROCEDURE - Step 2

  32. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/o Navigation System) 

    Refer to PROCEDURE - Step 8

  33. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 9
  34. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY (for 14 Speakers) 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 10
  35. REMOVE LOWER INSTRUMENT COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 10

  36. REMOVE COMBINATION METER ASSEMBLY 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 11
  37. REMOVE NO. 1 CONSOLE BOX DUCT 
    1. GTY1017453Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  38. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY 

    Refer to REMOVAL [11/2020 - 12/2023]

  39. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY 
    1. GTY1016535Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A w/ Navigation System - -
      1. Disconnect each connector.
      2. Detach the claw and remove the cooler thermistor (room temperature sensor).
    2. GTY1017703Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 5 bolts <C>.
      2. Remove the nut <D>.
    3. GTY1017776Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
      1. Lift in the direction indicated by the arrow shown in the illustration to detach the guide.
        NOTE:
        • Do not damage the instrument panel safety pad assembly or vehicle interior.
        • Make sure that the wire harness does not get caught on anything as it may become damaged.
    4. GTY1016688Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
      1. Remove the instrument panel safety pad assembly as shown in the illustration.
        NOTE:
        • Do not damage the instrument panel safety pad assembly or vehicle interior.
        • Make sure that the wire harness does not get caught on anything as it may become damaged.
scientia non olet · About LEMON Manuals