Removal [11/2020 - 12/2023]: Procedure

Refer to REMOVAL [11/2020 - 11/2021] , or refer to REMOVAL [11/2021 - 12/2022] , or refer to REMOVAL [12/2022 - 12/2023]

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE: If the shift lock control unit assembly is subjected to any strong impact (such as being dropped), replace it with a new one. Since the shift lock control unit assembly is a non-disassembly type, replace it with a new one if disassembled.

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   1. Disconnect the wire harness clamp from the shift lock control unit assembly.
   2. Remove the 3 nuts from the shift lock control unit assembly.
   3. Disconnect the connector while pulling the shift lock control unit assembly towards you and remove the shift lock control unit assembly.