Test and adjustment values: Passenger cars: Crank assembly - BE03.00-Z-9999AZ
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL ALL
| Belt pulley/vibration damper | ENGINE 271, 275, 285 | BE03.30-P-1000-02C | |
| Belt pulley/vibration damper | ENGINE 642 | BE03.30-P-1000-02D | |
| Belt pulley/vibration damper | ENGINE 111, 112, 113, 137 | BE03.30-P-1000-02A | |
| Belt pulley/vibration damper | ENGINE 120 | BE03.30-P-1000-02B | |
| Check values for connecting rod bolts | ENGINE 103/, 104/, 119, 120 | BE03.10-P-1000-03B | |
| Check values for crankshaft bearing cap bolts | ENGINE 601, 602/982/983 | BE03.20-N-1000-01B | |
| Check values for crankshaft bearing cap bolts | ENGINE 640 | BE03.20-P-1000-01E | |
| Check values for crankshaft bearing cap bolts | ENGINE 137, 275, 285 | BE03.20-P-1000-01C | |
| Check values for crankshaft bearing cap bolts | ENGINE 642 | BE03.20-P-1000-01D | |
| Check values for crankshaft bearing cap bolts | ENGINE 651 | BE03.20-P-1000-01F | |
| Check values for crankshaft bearing cap bolts | ENGINE 111, 604, 605, 606, 611, 612, 613, 628, 646, 647, 648... | BE03.20-P-1000-01A | |
| Check values for crankshaft main bearing shells | ENGINE 137, 275.950/951/953/954/980/981/982/983, 285.950/980 | BE03.20-P-1000-03E | |
| Check values for crankshaft main bearing shells | ENGINE 601, 602, 603 | BE03.20-P-1000-03B | |
| Check values for crankshaft main bearing shells | ENGINE 270, 274 | BE03.20-P-1000-03L | |
| Check values for crankshaft main bearing shells | ENGINE 152, 157, 276, 278 | BE03.20-P-1000-03K | |
| Check values for crankshaft main bearing shells | ENGINE 111 | BE03.20-P-1000-03C | |
| Check values for crankshaft main bearing shells | ENGINE 604, 605, 606, 611, 612.961/962/963/965/966/990, 613, 646.8/951/961/962/963/966, 647, 648 | BE03.20-P-1000-03A | |
| Check values for crankshaft main bearing shells | ENGINE 651 | BE03.20-P-1000-03I | |
| Check values for crankshaft main bearing shells | ENGINE 628.960/961/962/963, 629, 642 | BE03.20-P-1000-03D | |
| Check values for crankshaft main bearing shells | ENGINE 156, 159 | BE03.20-P-1000-03J | |
| Check values for crankshaft main bearing shells | ENGINE 612.967 in MODEL 209 | BE03.20-P-1000-03F | |
| Check values for crankshaft main bearing shells | ENGINE 640 | BE03.20-P-1000-03H | |
| Check values for piston rings | ENGINE 642 | BE03.10-P-1000-05E | |
| Check values for piston rings | ENGINE 112, 113, 137, 275, 285... | BE03.10-P-1000-05B | |
| Check values for piston rings | ENGINE 271.8/910/911/921/940/941/942/944/946/948/9 50/952/954/955/956/957 | BE03.10-P-1000-05C | |
| Check values for piston rings | ENGINE 640 | BE03.10-P-1000-05I | |
| Check values for piston rings | ENGINE 266.920/940/960/980 | BE03.10-P-1000-05F | |
| Check values for piston rings | ENGINE 626, 651 | BE03.10-P-1000-05K | |
| Check values for piston rings | ENGINE 152, 157, 272.91/92/94/95/96/97/98/99, 273.92/96/97, 276, 278 | BE03.10-P-1000-05D | |
| Check values for piston rings | ENGINE 270.910/920 ENGINE 274.910/920 | BE03.10-P-1000-05L | |
| Check values for piston rings | ENGINE 646.8/9, 647, 648 | BE03.10-P-1000-05J | |
| Check values for piston rings | ENGINE 120 | BE03.10-P-1000-05A | |
| Check values for connecting rod | ENGINE 137.970 | BE03.10-P-1000-01E | |
| Check values for connecting rod | ENGINE 640 | BE03.10-P-1000-01F | |
| Check values for connecting rod | ENGINE 111, 166, 668... | BE03.10-P-1000-01A | |
| Check values for connecting rod | ENGINE 112, 113... | BE03.10-P-1000-01D | |
| Check values for connecting rod | ENGINE 120 | BE03.10-P-1000-01B | |
| Check values for connecting rod | ENGINE 601.943, 602.980/982/983/984/985 | BE03.10-N-1000-01D | |
| Check values for connecting rod | ENGINE 651 | BE03.10-P-1000-01H | |
| Check values for connecting rod | ENGINE 629, 642 | BE03.10-P-1000-01G | |
| Check values for connecting rod | ENGINE 601, 602, 603, 604, 605, 606, 611, 612, 613, 628, 646, 647, 648... | BE03.10-P-1000-01C | |
| Flywheel | ENGINE 601, 602/, 604, 605, 606/ | BE03.30-P-1000-03A | |
| Flywheel | ENGINE 103, 104, 111 | BE03.30-P-1000-03B | |
| Flywheel | ENGINE 270, 271, 272, 274, 607, 640, 642, 646, 651 | BE03.30-P-1000-03D | |
| Flywheel | ENGINE 601, 603/ | BE03.30-P-1000-03C | |
| Flywheel, driven plate | ENGINE 103, 104, 119, 120 | BE03.30-P-1000-01B | |
| Flywheel, driven plate | ENGINE 111, 271, 604, 605, 606, 611.96/981/983/987, 612.96/981/99, 613 | BE03.30-P-1000-01A | |
| Flywheel, driven plate | ENGINE 601, 602.000/912/93/94/962, 603 | BE03.30-P-1000-01C | |
| Lanchester balancer | ENGINE 270, 274 | BE03.20-P-1000-05B | |
| Lanchester balancer | ENGINE 640, 646.8/961/962/963/966 | BE03.20-P-1000-05A | |
| Starter ring gear | ENGINE 120 | BE03.30-P-1000-04B | |
| Starter ring gear | ENGINE 602, 604, 605, 606, 611, 612.961/962/963/965/966/967/990 | BE03.30-P-1000-04A | |
| TDC sensor bracket | ENGINE 604, 605, 606 | BE03.00-P-1000-01A | |
| Test specifications for connecting rod bolts | ENGINE 601, 602 (except 602.98), 603 | BE03.10-P-1000-03C | |
| Test specifications for connecting rod bolts | ENGINE 611, 612, 613, 628, 629, 642, 646, 647, 648, 668... | BE03.10-P-1000-03D | |
| Test specifications for connecting rod bolts | ENGINE 640 | BE03.10-P-1000-03G | |
| Test specifications for connecting rod bolts | ENGINE 166.940/960/961/990/991/995 | BE03.10-P-1000-03E | |
| Test specifications for connecting rod bolts | ENGINE 266 | BE03.10-P-1000-03F | |
| Test specifications for connecting rod bolts | ENGINE 651 | BE03.10-P-1000-03I | |
| Test specifications for connecting rod bolts | ENGINE 111, 112, 113, 137, 152, 157, 177, 178, 270, 271, 272, 273, 274, 275, 276, 278, 285, 604, 605, 606... | BE03.10-P-1000-03A | |
| Test specifications for crankshaft | ENGINE 604, 605, 606, 611, 612.961/962/963/990, 613 | BE03.20-P-1000-02D | |
| Test specifications for crankshaft | ENGINE 270, 274 | BE03.20-P-1000-02K | |
| Test specifications for crankshaft | ENGINE 629, 642, 646 | BE03.20-P-1000-02E | |
| Test specifications for crankshaft | ENGINE 152, 157, 276, 278 | BE03.20-P-1000-02J | |
| Test specifications for crankshaft | ENGINE 640 | BE03.20-P-1000-02F | |
| Test specifications for crankshaft | ENGINE 120 | BE03.20-P-1000-02B | |
| Test specifications for crankshaft | ENGINE 651 | BE03.20-P-1000-02H | |
| Test specifications for crankshaft | ENGINE 111, 112.951/976, 166.940/960/990, 668.940/941/942 | BE03.20-P-1000-02A | |
| Test specifications for crankshaft | ENGINE 156, 159 | BE03.20-P-1000-02I | |
| Test specifications for crankshaft | ENGINE 601.943, 602/980/982/983/984/985 | BE03.20-N-1000-02D | |
| Test specifications for crankshaft | ENGINE 601, 602 (except 602.98), 603 | BE03.20-P-1000-02C | |
| Test specifications for crankshaft bearing clearance | ENGINE 604, 605, 606, 611, 612, 613, 628, 629, 642, 646, 647, 648, 651... | BE03.20-P-1000-04A | |
| Test specifications for crankshaft bearing clearance | ENGINE 270, 274 | BE03.20-P-1000-04H | |
| Test specifications for crankshaft bearing clearance | ENGINE 111, 166.940/960/990, 668.940/941/942 | BE03.20-P-1000-04D | |
| Test specifications for crankshaft bearing clearance | ENGINE 120 | BE03.20-P-1000-04B | |
| Test specifications for crankshaft bearing clearance | ENGINE 112, 113, 137, 152, 155, 156, 157, 159, 177, 178, 271, 272, 273, 275, 276, 278, 285... | BE03.20-P-1000-04E | |
| Test specifications for crankshaft bearing clearance | ENGINE 640 | BE03.20-P-1000-04F | |
| Test specifications for pistons | ENGINE 601, 602, 603, 604, 605, 606, 611, 612, 613, 628, 629, 642... | BE03.10-P-1000-02B | |
| Test specifications for pistons | ENGINE 640 | BE03.10-P-1000-02H | |
| Test specifications for pistons | ENGINE 601.943, 602.980/982/983/984/985 | BE03.10-N-1000-02E | |
| Test specifications for pistons | ENGINE 646.8/951/961/962/963/966, 647, 648 | BE03.10-P-1000-02I | |
| Test specifications for pistons | ENGINE 651 | BE03.10-P-1000-02J | |
| Test specifications for pistons | ENGINE 271, 275, 285... | BE03.10-P-1000-02F | |
| Test specifications for pistons | ENGINE 112, 113, 155, 272, 273... | BE03.10-P-1000-02D | |
| Test specifications for pistons | ENGINE 270.910/920 | BE03.10-P-1000-02L | |
| Test specifications for pistons | ENGINE 120 | BE03.10-P-1000-02C | |
| Test specifications for pistons | ENGINE 137.970 | BE03.10-P-1000-02E | |
| Test specifications for pistons | ENGINE 111.920/921/940/941/942/943/944/945/946/947/960/961/970/973/974/975/977 | BE03.10-P-1000-02A | |
| Test values for crankshaft bearing cap bolts | ENGINE 601, 602, 603 | BE03.20-P-1000-01B | |
| Test values for crankshaft bearing play | ENGINE 601, 602/, 603/(except, 602.982) | BE03.20-P-1000-04C | |
| Test values for crankshaft bearing play | ENGINE 601.943, 602.980/981/982/983/984/985 | BE03.20-N-1000-04A | |
| Test values for crankshaft main bearing shells | ENGINE 601.943, 602.980/981/982/983/984/985 | BE03.20-N-1000-03A |