Check values for connecting rod - BE03.10-P-1000-01H
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 651
CHECK VALUES FOR CONNECTING RODS
| Number | Designation | ENGINE 651 | ||
|---|---|---|---|---|
| BE03.10-P-1001-01H | Dimension | Distance from center of connecting rod bearing bore to connecting rod bush bore (L) | mm | 143, 52...143, 58 |
| Width of connecting rod at connecting rod bearing bore (B) | mm | 21, 94...22, 00 | ||
| - | ||||
| BE03.10-P-1002-01H | Dimension | Connecting rod bearing shell basic bore (D1) Ø | mm | 57, 600...57, 614 |
| Permissible out-of-roundness and conicity of basic bore | mm | 0, 007 | ||
| - | - | |||
| BE03.10-P-1003-01H | Dimension | Permissible axle twist of connecting rod bearing bore relative to connecting rod bush bore over a length of 80 mm | mm | 0, 06 |
| BE03.10-P-1004-01H | Dimension | Permissible axial deviation from parallel of connecting rod bearing bore relative to connecting rod bush bore over a length of 80 mm | mm | 0, 045 |
| BE03.10-P-1005-01H | Dimension | Permissible weight difference between complete connecting rods in the same engine | g | 2 |
| BE03.10-P-1006-01H | Dimension | Connecting rod bushing inner Ø (d) | mm | 30, 038...30, 044 |
| For picture, see | AR03.10-P-6111AW | |||
| BE03.10-P-1007-01H | Dimension | Connecting rod bushing basic bore Ø (d1) | mm | 32, 500...32, 525 |
| - | - | |||
| BE03.10-P-1008-01H | Dimension | Piston pin play in connecting rod bushing | mm | 0, 038...0, 044 |
| BE03.10-P-1010-01H | Dimension | Peak-to-valley height (Rz) inside connecting rod bush | μm | 5 |