Test specifications for crankshaft bearing clearance - BE03.20-P-1000-04A

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 604, 605, 606, 611, 612.961/962/963/965/966/967/990, 613, 628.960/961/962/963, 629, 642, 646.8/951/961/962/963/966, 647, 648, 651, 654

TEST SPECIFICATIONS FOR CRANKSHAFT BEARING CLEARANCE

Number	Designation			Engine 604, 605, 606	Engine 611, 612.961/962/963/965/966/967/990, 613, 646.951/961/962/963/966, 647, 648
BE03.20-P-1001-04A	Crankshaft bearing clearance (when new)	Radial measurement when new	mm	0, 03...0, 05	0, 03...0, 05
		Radial wear limit	mm	0, 08	0, 08
		Axial measurement when new	mm	0, 10...0, 25	0, 10...0, 25
		Axial wear limit	mm	0, 3	0, 3

TEST SPECIFICATIONS FOR CRANKSHAFT BEARING CLEARANCE

Number	Designation			Engine 628.960/961/962/963	Engine 629
BE03.20-P-1001-04A	Crankshaft bearing clearance (when new)	Radial measurement when new	mm	0, 03...0, 05	0, 042...0, 068
		Radial wear limit	mm	0, 08	-
		Axial measurement when new	mm	0, 10...0, 25	0, 100...0, 246
		Axial wear limit	mm	0, 3	-

TEST SPECIFICATIONS FOR CRANKSHAFT BEARING CLEARANCE

Number	Designation			Engine 642	Engine 646.8
BE03.20-P-1001-04A	Crankshaft bearing clearance (when new)	Radial measurement when new	mm	0, 029...0, 056	0, 027...0, 051
		Radial wear limit	mm	-	0, 08
		Axial measurement when new	mm	0, 100...0, 254	0, 100...0, 254
		Axial wear limit	mm	-	0, 3

TEST SPECIFICATIONS FOR CRANKSHAFT BEARING CLEARANCE

Number	Designation			Engine 651	Engine 654
BE03.20-P-1001-04A	Crankshaft bearing clearance (when new)	Radial measurement when new	mm	0, 028...0, 063	0, 027...0, 048
		Radial wear limit	mm	-	-
		Axial measurement when new	mm	0, 110...0, 300	0, 12...0, 353
		Axial wear limit	mm	-	-