Check values for connecting rod - BE03.10-P-1000-01G
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 629, 642
CHECK VALUES FOR CONNECTING RODS
| Number | Designation | ENGINE 629 | ENGINE 642 | |||
|---|---|---|---|---|---|---|
| BE03.10-P-1001-01G | Dimension | Distance from center of connecting rod bearing bore to connecting rod bush bore (L) | mm | 163, 97...164, 03 | 167, 97...168, 03 | |
| Width of connecting rod | Connecting rod bearing bore (B) | mm | 18, 90....19, 10 | 18, 1...18, 6 | ||
| Connecting rod bush bore (b) | mm | 25, 94....26, 00 | 21, 94...22, 0 | |||
| For picture, see | AR03.10-P-6111AW | - | ||||
| BE03.10-P-1002-01G | Dimension | Connecting rod bearing shell basic bore (D1) Ø | mm | 57, 600...57, 614 | 67, 600...67, 614 | |
| Permissible out-of-roundness and conicity of basic bore | mm | 0, 020 | 0, 007 | |||
| For picture, see | AR03.10-P-6111AW | - | ||||
| BE03.10-P-1003-01G | Dimension | Permissible twist of connecting rod bearing bore to connecting rod bush bore over a length of 100 mm | mm | 0, 100 | 0, 100 | |
| BE03.10-P-1004-01G | Dimension | Permissible axial deviation from parallel of connecting rod bearing bore to connecting rod bush bore over a length of 100 mm | mm | 0, 045 | 0, 045 | |
| BE03.10-P-1005-01G | Dimension | Permissible weight difference between complete connecting rods in the same engine | g | 2 | 2 | |
| BE03.10-P-1006-01G | Dimension | Connecting rod bushing internal (d) | mm | 30, 038...30, 044 | 30, 038...30, 044 | |
| For picture, see | AR03.10-P-6111AW | - | ||||
| BE03.10-P-1007-01G | Dimension | Connecting rod bush outside Ø | mm | - | - | |
| BE03.10-P-1008-01G | Dimension | Connecting rod bushing basic bore Ø (d1) | mm | 32, 500...32, 525 | 32, 500...32, 525 | |
| For picture, see | AR03.10-P-6111AW | - | ||||
| BE03.10-P-1009-01G | Dimension | Piston pin play in connecting rod bushing | mm | 0, 038...0, 044 | 0, 028...0, 039 | |
| BE03.10-P-1010-01G | Dimension | Peak-to-valley height (Rz) inside connecting rod bush | μm | 5 | 5 | |
| BE03.10-P-1011-01G | Connecting rod bolt | Thread Ø | M | 8X1 | 8, 5X1 | |
| Shank length when new | mm | - | 47 (±0, 3) | |||