Check values for crankshaft main bearing shells - BE03.20-P-1000-03D
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 628.960/961/962/963, 629, 642
CHECK VALUES FOR CRANKSHAFT MAIN BEARING SHELLS
| Number | Designation | ENGINE 628.960/961/962/963 | ENGINE 629 | ||
|---|---|---|---|---|---|
| BE03.20-P-1001-03D | Main bearing shells standard dimension for upper crankcase section and lower crankcase section Ø 70.00 mm | Replacement part additional number (color coding blue) | 52 | 52 | |
| Bearing shell thickness | mm | 2, 252...2, 257 | 2, 247...2, 252 | ||
| BE03.20-P-1002-03D | Main bearing shells standard dimension for upper crankcase section and lower crankcase section Ø 70.00 mm | Replacement part additional number (color coding yellow) | 54 | 54 | |
| Bearing shell thickness | mm | 2, 257...2, 262 | 2, 252...2, 257 | ||
| BE03.20-P-1003-03D | Main bearing shells standard dimension for upper crankcase section and lower crankcase section Ø 70.00 mm | Replacement part additional number (color coding red) | 56 | 56 | |
| Bearing shell thickness | mm | 2, 262...2, 267 | 2, 257...2, 262 | ||
| BE03.20-P-1004-03D | Main bearing shells standard dimension for lower crankcase section Ø 70.00 mm | Replacement part additional number (color coding white) | 57 | 57 | |
| Bearing shell thickness | mm | 2, 267...2, 272 | 2, 262...2, 267 | ||
| BE03.20-P-1005-03D | Main bearing shells standard dimension for lower crankcase section Ø 70.00 mm | Replacement part additional number (color coding violet) | 58 | 58 | |
| Bearing shell thickness | mm | 2, 272...2, 277 | 2, 267...2, 272 | ||
| BE03.20-P-1006-03D | Crankshaft radial play (main bearing play) | mm | - | 0, 042...0, 068 | |
CHECK VALUES FOR CRANKSHAFT MAIN BEARING SHELLS
| Number | Designation | ENGINE 642 | ||
|---|---|---|---|---|
| BE03.20-P-1001-03D | Main bearing shells standard dimension for upper crankcase section and lower crankcase section Ø 70.00 mm | Replacement part additional number (color coding blue) | 52 | |
| Bearing shell thickness | mm | 2, 250...2, 255 | ||
| BE03.20-P-1002-03D | Main bearing shells standard dimension for upper crankcase section and lower crankcase section Ø 70.00 mm | Replacement part additional number (color coding yellow) | 54 | |
| Bearing shell thickness | mm | 2, 255...2, 260 | ||
| BE03.20-P-1003-03D | Main bearing shells standard dimension for upper crankcase section and lower crankcase section Ø 70.00 mm | Replacement part additional number (color coding red) | 56 | |
| Bearing shell thickness | mm | 2, 260...2, 265 | ||
| BE03.20-P-1004-03D | Main bearing shells standard dimension for lower crankcase section Ø 70.00 mm | Replacement part additional number (color coding white) | 57 | |
| Bearing shell thickness | mm | 2, 265...2, 270 | ||
| BE03.20-P-1005-03D | Main bearing shells standard dimension for lower crankcase section Ø 70.00 mm | Replacement part additional number (color coding violet) | 58 | |
| Bearing shell thickness | mm | 2, 270...2, 275 | ||
| BE03.20-P-1006-03D | Crankshaft radial play (main bearing play) | mm | - | |