Replacing backrest frame

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

The required steps can vary depending on equipment.

The instructions provided in the document are for vehicles with the maximum possible equipment.

Remove padding for front backrest. → 741719 REMOVING AND INSTALLING PADDING FOR FRONT BACKREST - "REMOVING "
Remove headrest guide -1- .
1. 2.1. Press in fixing clips -2- on the left and right and pull headrest guide up and out.
Remove lumbar support. → 723419 REMOVING AND INSTALLING LUMBAR SUPPORT - "REMOVING"
Remove air cushion for backrests. → 721719 REMOVING AND INSTALLING AIR CUSHION FOR BACKREST - "REMOVING"
Remove motor for air cushion. → 723919 REMOVING AND INSTALLING MOTOR FOR AIR CUSHION - "REMOVING"
Remove suction fan for backrest surface. → 741619 REMOVING AND INSTALLING SUCTION FAN FOR BACKREST SURFACE - "REMOVING "
Remove side airbag. → 696319 REMOVING AND INSTALLING FRONT SIDE AIRBAG - "REMOVING "
Remove wire harness for backrest.
Replace backrest frame.
Position wire harness for backrest.
Install side airbag. → 696319 REMOVING AND INSTALLING FRONT SIDE AIRBAG - "INSTALLING"
Install suction fan for backrest surface. → 741619 REMOVING AND INSTALLING SUCTION FAN FOR BACKREST SURFACE - "INSTALLING"
Install motor for air cushion. → 723919 REMOVING AND INSTALLING MOTOR FOR AIR CUSHION - "INSTALLING"
Install air cushion for backrest. → 721719 REMOVING AND INSTALLING AIR CUSHION FOR BACKREST - "INSTALLING"
Install lumbar support. → 723419 REMOVING AND INSTALLING LUMBAR SUPPORT - "INSTALLING"
Install headrest guide.
Install padding for front backrest. → 741719 REMOVING AND INSTALLING PADDING FOR FRONT BACKREST - "INSTALLING"